For all of you "FLATBED" fans,,,,,,,,,,,
That will be the DTR Truck Of the Month category for the month of November.
This will be open for trucks of any year! (1st, 2nd & 3rd Gens,,,, SRW & DRW)

It's time for all you folks with a "Mobile-Helicopter-Landing-Pad" on the back of your rig to post your pics!

POST YOUR PICS in this thread!


**********************************************
Truck Of the Month Procedure for 2008

The DTR TOM Staff has come up with a new procedure for choosing the TOM candidates.

* Around the 1st of the month, we will post a thread with the winner for the previous month’s poll in the General Diesel Discussion section of the forums.

* At the same time, we will post a “TOM Candidate” thread in the same forum. In this thread we will announce the category of trucks that will be accepted as possible candidates. (1st Gen 250, 350, 2nd Gen 2500, 3500, 3rd Gen 2500, 3500, MegaCab, etc.)

* If your truck falls into the chosen category for that month and you would like to have a chance to be in the poll, then you can nominate your truck by posting a picture from your gallery in that thread.
* NOTE: The picture MUST come from your Diesel Truck Resource Member Photo Gallery! (Anything else will be deleted.)

* You can also list some of the mods and accessories on your rig in the same post. Please post only once in that thread because the TOM committee will select three trucks from that thread to be in the poll. The process for selecting the three candidates from this thread will be completely at random. If your truck is not selected for the poll or it is but it doesn't win, you may nominate it again when your category comes back around.

* Previous Winners of the TOM will not be eligible to participate. (Previous Winner being defined as truck and/or DTR Member)

* The “TOM Candidate” thread will be open from around the 1st of the month until around the 14th of the month. That gives you two weeks to submit your truck.

* At this time it will be locked, the three poll candidates will be chosen at random and the poll will be posted on or around the 15th . The poll will be voted on until the end of the month and we start all over again on the 1st of the next month by posting the winner in one thread and posting the “TOM Candidate” thread for the next month's category.

Special THANKS to Tim Barber at TRE Diesel Performance for sponsoring the TOM Award plaques!

*****************************************

 

Well, it looks like I am the only one..lol

Mods: 13" custom lift, Custom shackle desighn, One off Third links to prevent axlewrap frt/rear while still mainting articulation, 5.13 gears, Detroit Locker rear, truetrac front, Rear disc brakes, Dana 60's frt/rear, 44" boggers, built 727 trans, full manual valve body, custom wireing only stock wires are the ones coming out of the steering column, military toggles on its own breaker for every circut, Custom stainless dash, Corebeu Bucket seats, B&M ratchet shifter, Electric fans, Custom remote trans cooler cage, Screamin 360, MSD ignition,

Only thing it needs, BUILT 500hp P-PUMPED 12V..lol

 

And there is our winner!

 

More Pics DNR!!

 

oh man that is so sweet

 

Having trouble downloading more pics to the gallery, most of my pics are in photobucket, and I don't want them to get kicked off for not being in my gallery...

But I guess this won't be in the original post, so here goes nothing!!!

 

Ohhh.... that is SWEEEETTTTT!!!

How about no bed?





Just kiddin!

 

What's mine say...DUDE!

What's mine say...SWEET!

Nice rig!

 

I dont think theres anything that says you cant run 2 months in a row Doznfire! Post up that 66 again!

 

Yep, cool as it is, it's not eligible.

 

Custom Built By Me -- Truck With Bed Weighs Approx 11K



3/16" Tread Plate On Top, 1/8" Used On Fenders - Wheel Well Liners - Running Boards,
1 1/2" Solid Rubber Decking (Rumber), All LED Lighting. Winch Poles Will Hide Under Deck.
3 Bolt Holes On Rear Corners Is For the Bolt On Tail Roll



2 1/2" Receiver Tubing For Stake-Bumper Pockets To Allow For Unlimited Add Ons Like Pipe / Reg
Vises Ect. Eyelets For Hook Type Ratchet Straps. 1/2" Plate In Front-Middle For Winch Mount



Eventually It Will Be Equipped With Hydraulic Winchs (Front Bumper & Rear Deck), Welder And A/C.
Rear Hatch Allows For Trailer / Truck Electrical Hookups And LP Access. B&W 1500 Turn Over Ball



My Chopper Pad Is 12' Long And It Pulls The Aircraft Carrier As Well.. Combined Length Is 61' Long

 

Here is my '91 D350. Purchased as a Cab and Chassis and immediately had the sleeper and bed put on. Did some work a couple years ago to freshen it up.

Used for hauling the ATV's and trailer to play areas



With Trailer in tow.

 

OK here is my truck, the pictures are from a couple years ago, but it pretty much looks the same now. I can't get any new pictures right now as its still down getting an alternator upgrade.







Hope everyone likes it.

 

Thats a **** nice setup!

 

Can't we just pretend it has a diesel, I can photoshop some stacks on it for ya!!