Nice Cat 2micron filter setup.

Reply Subscribe

Thread Tools

Search this Thread

01-16-2006 | 10:08 PM

#46

dezeldog

Registered User

Joined: Jul 2004

Posts: 506

Likes: 0

From: the mitten

Quote:

Originally Posted by Superduty

Donaldson P174769. Should be about $24. (It was in my post on page 1... not that it matters.)

Stress cracking ? That is 1/8" aluminum plate. 4 inches wide. The head and filter full of fuel weigh 3-4 pounds. I'm not too worried about stress cracking. If I do see a crack, I'll report it.

Thats my point its only 1/8 with 3-4lbs hanging off of it and with the viberation of the engine..oh well whats the use, you said that you'd report it.

Jim

Reply Like

01-17-2006 | 09:51 AM

#47

motrapper

Registered User

Joined: Sep 2005

Posts: 311

Likes: 2

From: utah

has anyone looked at the dahl 100 or 150 i dont believe thier is any better water fuel filter out thier and many have just removed the factory unit when using the heated unit flow for the 100 is 65 gallons per hour and the 150 is much more

just a thought

Reply Like