How do I get the white wax out of my black textured bumper?
#1
How do I get the white wax out of my black textured bumper?
I polished & waxed my 07 QC with an orbital buffer and I seem to have hit a couple spots on the black textured areas like the bumper and door handles. It looks terrible and doesn't come off with the car wash soap. What works best to get rid of it?
#3
Registered User
There is a product I used this fall, I can't remember exactly but it was something with ICE. Someone on this site loved it it is a spray type of way that can be used on paint & plastics. I remember he mentioned about spraying it on the plastic on his truck steps and about killed himself slipping all over . I used it this fall to get some wax off that rough textured plastic bed rails and it worked. I am at work but will look for it and let you know probably tomorrow. The snow salt and junk on the road can hardly see the color of the truck, let alone detail the outside . I'm tired of winter already have a month to go yet for temperatures to start going up.
#4
Registered User
ICE is made by Turtle Wax. They have a paste version too, I like it a lot better than the spray. You can get it all over the plastic pieces and they turn out looking good. After I accidentally got some on the trim I decided it helped it look new again and waxed the trim/mirrors and everything. I did not wax the tread on top of the rear bumper or my step bars.
Last time I was at walmart they had ICE in both versions.
They also have a liquid clay bar but I've heard its not the best.
Last time I was at walmart they had ICE in both versions.
They also have a liquid clay bar but I've heard its not the best.
#7
Registered User
Join Date: Jan 2007
Location: Marshall, Texas
Posts: 530
Likes: 0
Received 0 Likes
on
0 Posts
I took mine to a restoration/detail shop that DOES NOT use armoral on ANYTHING. I had also gotten some wax on the front bumper cover. They got it out without using any silicone. Sorry, not sure how they did it, but its possible. I have since decided that the bumper cover would look better if it were painted the same blue as the upper part of the truck, thats in the works!!!!
Trending Topics
#8
Registered User
if you don't mind a small amount of work. Use fast orange, or other liquid hand cleaners with pumice in them. put some on the bumper cover or whatever you may have issues with, including the dash, and use a medium bristle brush, or a good cloth to rub it in. The pumice will clean the texture, and the carrier agent takes the stuff away, then simply wash with soap and water, and treat with a protectant of your choice.
This stuff can also work on pesky bugs on the chrome bumper, and so on.
This stuff can also work on pesky bugs on the chrome bumper, and so on.
#11
Registered User
Join Date: Oct 2007
Location: Okotoks, AB
Posts: 1,716
Likes: 0
Received 0 Likes
on
0 Posts
try mother's back to black to get it out.
and next time simply clean and protect the plastic trim before waxing. then while waxing carry a cloth in your pocket and when you see some wax on the plastic it, wipe it with the cloth. it works very well for me when i use 303 protectant. when done waxing, go over the plastic trim with a mildly damp cloth to make it look solid and to get rid of any greasy smear marks.
and next time simply clean and protect the plastic trim before waxing. then while waxing carry a cloth in your pocket and when you see some wax on the plastic it, wipe it with the cloth. it works very well for me when i use 303 protectant. when done waxing, go over the plastic trim with a mildly damp cloth to make it look solid and to get rid of any greasy smear marks.
#12
Registered User
Join Date: Oct 2007
Location: Okotoks, AB
Posts: 1,716
Likes: 0
Received 0 Likes
on
0 Posts
oh just a note for future reference. . .
don't protect your tonneau with plastic/vinyl protectant (especially if rain is forecasted)! i did this and it looked really good, then one week later it rained and i had drip marks running all the way down my tailgate and rear fenders! it came off easily with a wash, but it sure looked terrible before i got a cance to wash it!
don't protect your tonneau with plastic/vinyl protectant (especially if rain is forecasted)! i did this and it looked really good, then one week later it rained and i had drip marks running all the way down my tailgate and rear fenders! it came off easily with a wash, but it sure looked terrible before i got a cance to wash it!
#13
I took mine to a restoration/detail shop that DOES NOT use armoral on ANYTHING.
I did the exact same thing that you did. There is a great detail forum site just like this one that we are on. http://autopia.org/forum/index.php They are a great wealth of info. But be warned, if you're **** about your autos the site can be very adictive. I ended up buying a full rotary buffer and a bunch of pads. Just do a search. I did not try the peanut butter but read that it works. I did get decent results though with WD40.
#14
Registered User
Next time do a little preventative to help in the clean up. What I do is masking tape up stuff like this. Don't have to press down hard on it all. Just enough to protect the trim stuff. Works every time. Oh, and I normally use an old sheet for the wipers and cowl panel just be careful with your buffer not to ****** it off.....
#15
Black Magic takes wax off of black plastic trim. It's a very thick clear protectant that lasts for weeks. Be careful with it if you have plastic covered running boards. A few people almost fell trying to get into my truck!