FEMA haul?
FEMA haul?
12-14-2005, 08:01 PM
#2
Registered User
Northern Indiana is the place to get the fema trailers....I have done a few, but I have a full time job as well. It may not be worth it for you since you live in alabama. You would have to drive up here and hope that they have a trailer availible. I know most transport companies up here are not hiring currently because of the large amount of drivers hired for fema. I normally tow on the weekends and there has been a few times where I could not get a trailer. Every trailer that I have taken down I took to Purvis, MS. and by the way I pass through Cullman every time and fill up there. I did one recently this past weekend...Left Bristol IN at 340 PM friday night.....arrived at Purvis at 640 am saturday morning....and got back to Bristol at 1040 PM saturday night. about 890 miles 1-way. now thats some drivin'!!
-Andy
-Andy
12-14-2005, 09:45 PM
#3
Registered User
Join Date: Nov 2005
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
12-14-2005, 10:02 PM
#4
Registered User
Thread Starter
Join Date: Oct 2005
Location: Minor Hill, Tn
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
'Preciate the info. Thought I might make a few bucks, my wife doesn't work and could drive empty. Cullman...small town Alabama, actually a really good place to live. I work in Decatur at NUCOR Steel, we also have a mill in Crawfordsville, IN.
12-15-2005, 07:29 PM
#7
Registered User
Thread Starter
Join Date: Oct 2005
Location: Minor Hill, Tn
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by HappyGA
I work for Genreal Housing in Waycross, GA. We buy NUCOR I-Beam for our Mobile Homes we build.
Cool
. I work in the sheet division, you know....those big rolls that fall off trucks and knock holes in the road 
. If it's a steel product, then NUCOR makes it, as we have mills all over the country. Sheet, beam, bar, galv, stainless, etc.
Trending Topics
12-15-2005, 07:56 PM
#8
Registered User
FEMA haul?
Originally Posted by bgoodwin
Cool . I work in the sheet division, you know....those big rolls that fall off trucks and knock holes in the road . If it's a steel product, then NUCOR makes it, as we have mills all over the country. Sheet, beam, bar, galv, stainless, etc.
. I work in the sheet division, you know....those big rolls that fall off trucks and knock holes in the road . If it's a steel product, then NUCOR makes it, as we have mills all over the country. Sheet, beam, bar, galv, stainless, etc.
Thread
Thread Starter
Forum
Replies
Last Post