XLR8R

Cool!

One of our customers in VA has a similiar billet aluminum **** which accepts live 44 Magnum rounds!

... hey, you can't be TOO prepared.

Pav1973

I stop driving big trucks about 3 years ago and the shiter on all mine was about hip level,now I help my Dad on his coal truck and his darn shifter is about chin level and I hate it,might be diffrent when you got only 5-6 gears but go though 10 of them over 600 miles and it gets old fast being that high,trust me.

Pav

rip 112

I got this off my grandpa's good-ol 86', which is mine now. I know it isn't a full shifter assembly, but its a start.

LOGAN

Know anyone at the local bar or beer distributor, tap handles work great and look cool and you can pick your favorite beer. the live .44 rounds is a good idea, always nice to have some extras right in your hand.

rip 112

A buddy of mine has a budlight tap on his but its a foot long and sticks up pretty high, too high for me. Add a shortshifter and it would work good.

74dart

The NV4500 swap is done and here are the pics of the Eaton Roadranger shifter **** I used. The switches on the **** work good also.

LOGAN

if i dont get a 2wd 6-speed 24 valve in the future i am throwing a 5600 w/ a gear vendors in mine and converting it to a dually and putting 5.13 gears in it, that splitter switch would be great for the gear vendors unit, especially when pulling loads.

74dart

The switches on the Eaton gear shift are air not electric. Never used a gear splitter so I don't know what it uses.

CTD03

if you grab it with both hands and turn left it should come right off. this is how i did it and it wont mess up your old shift ***.

Ten_Bucks

Personally, I like the look of the B&M T handle on the shifter.

Scott