Cummins/Ford Conversion
10-07-2006 | 08:54 PM
#1
Thread Starter
Chapter President
Joined: Dec 2005
Posts: 1,741
Likes: 0
From: Big Spring (now Stephenville), Tx
Cummins/Ford Conversion
I have a buddy who is wanting to take an 03 V-10 F-250 and drop a Cummins 12V in it but he wants to find a shop that can do it. Who around Lubbock or Stephenville (basically those areas of Texas) can do it? It's a shame to waist a 12V on a Ford but hey it would still be a cool rig.
10-08-2006 | 12:14 PM
#2
Registered User
Joined: Mar 2004
Posts: 1,488
Likes: 0
From: Austin, TX, Toronto, ON
10-10-2006 | 07:25 AM
#4
Registered User
Joined: Apr 2005
Posts: 682
Likes: 0
From: PA
Im sure there are shops that do it, but I know many from TX have taken thier trucks to AutoWorld in MT to do the job.
www.autoworldmt.com
They have pictures of some of the conversions they have done
www.autoworldmt.com
They have pictures of some of the conversions they have done
10-10-2006 | 08:58 AM
#5
Registered User
Joined: Jan 2004
Posts: 995
Likes: 2
From: East Central OK
I've heard some good things about autoworld in Montana and I've heard some bad things about fordcummins but I don't have any personal experience with either. One good place to start researching a shop is http://www.cummins-conversion.com. They aren't run by a shop that does the work so they don't have a predefined view.
Good luck finding a local shop to do a turn-key job.
Good luck finding a local shop to do a turn-key job.
Thread
Thread Starter
Forum
Replies
Last Post
Alwaysworking
Cummins Conversions
72
01-06-2014 02:32 PM