? about gear splitters
#1
Registered User
Thread Starter
Join Date: May 2004
Location: Texas
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
? about gear splitters
I was just wondering if anybody has any experiences with a gear splitter. Was thinking of purchasing a gear venders splitter and havent heard or seen much on this subject.
Thanks,
brandon507
02 quad cab 4x4 dodge cdt 6 speed HO, edge comp, k&n filter, banks 4" exhaust
Thanks,
brandon507
02 quad cab 4x4 dodge cdt 6 speed HO, edge comp, k&n filter, banks 4" exhaust
#3
Administrator
My sons 3500 has the Gearvendor under / over drive unit. We used his truck to pull my GN with my truck on it out to Scheids in Indiana weekend before last. That thing is sweet with the 410 rear that his truck has. What hills it didn't want to pull in the high side (mainly due to exhaust temps) it would pull in the low side very well. The rpm difference between the high and low sides in fifth gear is somewhere around 450 to 500. His truck has the dreaded "red" shift button on the gear shift that everybody hates. It works very well. His shift lever also has another red button for the Pac Brake, kinda like driving one of the big rigs in the old days.
Thread
Thread Starter
Forum
Replies
Last Post
JohnInNH
3rd Gen High Performance and Accessories (5.9L Only)
15
09-03-2006 08:22 AM
mytrucksaslug
Performance and Accessories 2nd gen only
4
03-07-2006 08:40 PM
trout74
3rd Generation Ram - Non Drivetrain - All Years
3
08-29-2005 06:25 PM
Hummin Cummins
3rd Gen Engine and Drivetrain -> 2003-2007
3
12-25-2002 12:29 AM