12V Cummins in a Ford
#18
Update
As usual the veterans on this site had the ID covered on the engine.
It came out of a 1997/8 F550; the engine says 97. It's strange looking at a Cummins and have the plate say "made for Ford".
It is a 190 HP; HX35W on the turbo. Didn't take my camera, so don't have any addtional pics.
He also has the Turbo, but I imagine that sucker must be quite large.
I'm not sure if the front will have to be reworked to fit our trucks; the fan on there right now is huge.
It does mount differently at the front and at the back than out trucks, so I'll have to hunt for parts.
It came out of a 1997/8 F550; the engine says 97. It's strange looking at a Cummins and have the plate say "made for Ford".
It is a 190 HP; HX35W on the turbo. Didn't take my camera, so don't have any addtional pics.
He also has the Turbo, but I imagine that sucker must be quite large.
I'm not sure if the front will have to be reworked to fit our trucks; the fan on there right now is huge.
It does mount differently at the front and at the back than out trucks, so I'll have to hunt for parts.
#19
All you need is the normal pieces to bolt it into a 1st gen Dodge. All the bolt holes are there.
The HX-35 is not really any different than what's on a Dodge. Probably a 14 cm wastegated turbine housing.
The HX-35 is not really any different than what's on a Dodge. Probably a 14 cm wastegated turbine housing.
Thread
Thread Starter
Forum
Replies
Last Post
robsredford
12 Valve Engine and Drivetrain
2
11-22-2006 12:39 AM
blackcloud
Performance and Accessories 2nd gen only
2
06-29-2005 11:58 PM