1-5-3-6-2-4

I need a carb rebuilt for a 5hp tecumsa. anyone know a place in calgary?

pind

Luke, I'd say your workbench at home. Those little carbs are dead simple to work on.

In fact, if you understand carbs at all, they're all easy to work on. Even holley... and I don't like those.

You should be able to find a rebuild kit for it, and just pop it apart in about an hour or so.

1-5-3-6-2-4

yes true/. I've had it apart already here. I need the rebuild kit though. I have no idea where to get parts for an old tecumseh. thats more what I'm asking

pind

ALBERTA FOREST & GARDEN 1220 MERIDIAN RD NE CALGARY T2A 2 (403) 248-0878


Might try those guys, they are listed as a full line tecumseh dealer.
otherwise

these guys have a pretty decent site http://www.outdoordistributors.com/tecumseh/tmain.html

and so do these guys

http://www.jackssmallengines.com/tec...arts_index.cfm


I have also had really good luck with the Lawnmower Hospital in Edmonton. Been dealing with them for years.

roxxx

ALBERTA FOREST & GARDEN 1220 MERIDIAN RD NE CALGARY T2A 2 (403) 248-0878

Busy but have had luck with them in the Past

I was Just thinking of packin up the Ariens for a service, that's were I Would take it. Or there is a place down by Blackfoot were we moved your cab Cant remember the Name of it same area though

1-5-3-6-2-4

Oh ya theres a place right next to Jays shop. I don't know what they carry but its **** close I'll check them out.

Homestead

Rick at Mechanical Services in Cochrane is awesome. He will get you anything you need and then some. 403-932-3802

I've been dealing with him for years for all my small engine stuff.

Jeff

dvst8r

Two Brothers Small Engines, right here in the foothills industrial park.

winkdemon

action engine and i can build it

Tedonlin150

I'd be surprised if they rebulit it for you. Most places replace with an aftermarket carb which ends up being cheaper than rebuilding.

1-5-3-6-2-4

I would rebuild it. if I could. I've had it apart. is fubar. like FUBAR inside. so I'll have to order a replacement. for the hundred and change that it'll be. its not worth the hassle of trying to clean it, with a kit. and it still not working right.

Tedonlin150

See if you can look up an aftermarket one from Oregon

1-5-3-6-2-4

what do you mean an aftermarket one from Oregon? is the company called oregon?

1-5-3-6-2-4

Oh I see yes. looks like this is it. $70 not bad. I mean really the rebuild kit here and new float and small parts is easy 1/2 that to start with.

http://www.cmsmallengines.net/oregon...h-632334a.html

Tedonlin150

Yep. Buying a rebuild kit and doing it yourself is definately cheaper. It is a lot easier to just slap a new one on though and theres no adjusting.