Im a little upset now
11-29-2009, 11:08 PM
#1
Registered User
Thread Starter
Join Date: Aug 2006
Location: Fort McMurray, Alberta
Posts: 5,426
Likes: 0
Received 0 Likes
on
0 Posts
Im a little upset now
I pulled the flexplate off of my old engine tonight.. it is supposed to be a real nice suncoast laminate flexplate... it is a darn stock one....... can you say screwed.... I am just about ready to spit nails
11-29-2009, 11:51 PM
#6
Registered User
Sounds like the makings of a narrowly avoided and severely uncool situation.
I really don't like seeing stuff like that. Very unprofessional at best.
That said, it didn't blow up, you still have your component parts ( feet, legs, etc ) and you will get to the bottom of the story.
Good Luck Kev
I really don't like seeing stuff like that. Very unprofessional at best.
That said, it didn't blow up, you still have your component parts ( feet, legs, etc ) and you will get to the bottom of the story.
Good Luck Kev
11-30-2009, 12:14 AM
#7
Registered User
Join Date: Jul 2008
Location: Edmonton, Alberta
Posts: 322
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
11-30-2009, 01:32 AM
#11
Registered User
Join Date: Mar 2005
Location: Red Deer, Alberta
Posts: 3,190
Likes: 0
Received 0 Likes
on
0 Posts
I was told by many that they had their "own" flexplates where they beefed a stock one up by adding a center section to the stock one then rebalancing them. That's terrible Kevin, did they think you were never gonna see that??
11-30-2009, 08:43 AM
#12
Registered User
Thread Starter
Join Date: Aug 2006
Location: Fort McMurray, Alberta
Posts: 5,426
Likes: 0
Received 0 Likes
on
0 Posts
Yeah I have cooled down from last night... I was fit to be tied last night when I discovered this.... Now I know that the word will get back to them, and I am intentionally not putting the name of the company on here.
Unfortunatly the origional purchase of the flexplate was 4 years ago, which really has my head a scratching, I am almost at the thought that possibly there was a switch done at a later date???? You would think at the HP level that I am at a stock flex wouldnt have lived this long..... Oh well I am going to order a good flex plate here soon and be done with it.
Unfortunatly the origional purchase of the flexplate was 4 years ago, which really has my head a scratching, I am almost at the thought that possibly there was a switch done at a later date???? You would think at the HP level that I am at a stock flex wouldnt have lived this long..... Oh well I am going to order a good flex plate here soon and be done with it.
