Floor Storage Bin Install
#1
Floor Storage Bin Install
Gentlemen/Ladies of the DTR, I have 2 brand new Floor Storage Bins from a Ram that I am about to install into a 2011 Mega Cab Laramie that did not have them.
I need photos of someones already installed floor storage bins. Top and Bottom. Basically, the better photos I can get the better I can take install photos and give specific directions and install photos.
Please help me help the DTR and others. If this has already been covered, please PM me that I am a retard and send a link. Haha
I need photos of someones already installed floor storage bins. Top and Bottom. Basically, the better photos I can get the better I can take install photos and give specific directions and install photos.
Please help me help the DTR and others. If this has already been covered, please PM me that I am a retard and send a link. Haha
#4
Interior pics of the tub and how it fits into the carpet. Also which fasters are used.
Exterior pics of how and were they protrude beneath the vehicle. Specifically how they interfere or do not interfere with anything else under the truck.
Exterior pics of how and were they protrude beneath the vehicle. Specifically how they interfere or do not interfere with anything else under the truck.
#5
Sorry it took so long the wife took the camera, so I decided I would take them with the tablet. kind of rainy here and couldn't crawl underneath in a suit.
[IMG][/IMG]
if you look close it looks like the hole for the box is already present on CC's, and a panel just gets inserted on those without the bins.
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
if you look close it looks like the hole for the box is already present on CC's, and a panel just gets inserted on those without the bins.
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
#6
Any Luck
New2Diesel did you have any luck with installing those floor bins? I have a new mega cab and want to add those to my ride as well. Not sure why Ram does not put them in there when you buy the upgraded sound system. The sub takes over the main storage bin behind the seats.
#7
Registered User
Joined: Oct 2010
Posts: 930
Likes: 13
From: Somewhere between Here & There Over the Hill
I went out and took a look at my truck. I think it is possible, but will require a lot of fabricating for a factory type install, probably best for a body shop to do the work, then you have to ask yourself if it is really worth the extra cost.
Trending Topics
#8
Sorry Fellas, Been deployed again for a few months with no access or interest in internet. Actually, the factory kit installs flawlessly!! No issues at all. I actually have an air compressor in the driver side box.
Also, you can fit (4) total boxes in the back. (2) on each side as long as you cut them in sideways and face the doors opposite of each other. But that would cost about a thousand bucks for 4 small boxes. You are better off putting stuff in the tool box unless you have unlimited $$$
Also, you can fit (4) total boxes in the back. (2) on each side as long as you cut them in sideways and face the doors opposite of each other. But that would cost about a thousand bucks for 4 small boxes. You are better off putting stuff in the tool box unless you have unlimited $$$
#9
Registered User
Joined: Oct 2010
Posts: 930
Likes: 13
From: Somewhere between Here & There Over the Hill
Sweet! Thanks for updating! Be safe out there!
When you get back I would be interested in seeing any install pics if you have any.
Thank you for your service!
Sent from my DROID X2 using Tapatalk 2
When you get back I would be interested in seeing any install pics if you have any.
Thank you for your service!
Sent from my DROID X2 using Tapatalk 2
Thread
Thread Starter
Forum
Replies
Last Post
rlarimer
4th Gen Ram -Non Drivetrain- 2010 and Up
2
01-29-2014 12:17 AM
guzzirider
3rd Generation Ram - Non Drivetrain - All Years
1
07-21-2012 12:17 PM
NB64
4th Gen Ram -Non Drivetrain- 2010 and Up
1
10-02-2010 12:53 PM
tool
2nd Gen. Dodge Ram - No Drivetrain
7
04-21-2005 08:27 PM