What size of speakers fit in front door?
#16
After I changed out the stock 6 x 9's up front yesterday, coupled with the Pioneer stereo there was a HUGE difference in clarity.
#17
Registered User
I haven't changed out my speakers yet, but I could tell a huge difference in sound quality and volume when I switched to the Alpine Head unit. I am sure a change of speakers would be even more so though.
#18
If you change head units you really have to change the speakers though. The stock paper pieces of junk probably won't last long with decent watts going to them.
#19
#23
Banned
Join Date: Sep 2004
Location: Cedar Grove, New Jersey
Posts: 3,502
Likes: 0
Received 0 Likes
on
0 Posts
head unit, all wires, amp for the subs......you are only delaying the inevitable if you just do speakers. I am getting away with a high power head unit pushin all 4 door speaks plenty loud, and an amp run mono at low ohms pushin a ton of power to a pair of jl's subs........ cbrahs, not sure what else ya mite want to run off your inverter, but radio shack has a good lookin 1200 watt continuous power unit for 170 bux, or ebay for the same unit for 116.
#24
just run a small amp to your speakers and they will sound pretty good good luck __________________________________________________ _______________04.5 smarty sps62 afeII ddp50s cfm+ autometer pryo boost trans kelderman air ride 22.5s all diamond audio componts and subs
#25
Registered User
Join Date: Jan 2007
Location: Alice, texas
Posts: 426
Likes: 0
Received 0 Likes
on
0 Posts
#26
Registered User
Join Date: Jun 2007
Location: Good OL North Idaho
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
They are for the qc for what I know, I just stuck infinity kappa series 6x9 in front and 6.3 in rear with two alpine 12's under the seat all are amplified and it can get stupidly loud
#28
Bought some Polk's from crutchfield and it made all the difference in the world. The stock speakers are junk. Might go ahead and add dynamat material when you are in there. That seemed to really help also.
#29
#30
Thread
Thread Starter
Forum
Replies
Last Post
Eskimo
Performance and Accessories 2nd gen only
14
12-03-2005 02:51 PM
Patrick Campbell
Performance and Accessories 2nd gen only
7
12-16-2004 01:53 PM
dodgeboy59td
3rd Generation Ram - Non Drivetrain - All Years
8
11-07-2004 10:43 PM