Wanting to add power locks
#1
Registered User
Thread Starter
Join Date: Jan 2007
Location: Bean Station, TN
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Wanting to add power locks
Hello to all. I am very happy with my new 06 CTD. So far at 2000 miles I am to say the least impressed. Man what power. The only thing I would like to add for now ( I know i will go big one day) is power door locks. I bought the stripped down power nothing but the motor 2500 quad cab. Any suggestions?
Also how do I put info in my sig. on my posts?
Also how do I put info in my sig. on my posts?
#2
Registered User
Join Date: Jan 2007
Location: Wisconsin
Posts: 504
Likes: 0
Received 0 Likes
on
0 Posts
Im interested in knowing this as well. Are the trucks prewired? I would think they were since everything else is prewired like the overhead console and the fog lights but want to know for sure before I would go out and buy a "universal" kit
#4
Hello to all. I am very happy with my new 06 CTD. So far at 2000 miles I am to say the least impressed. Man what power. The only thing I would like to add for now ( I know i will go big one day) is power door locks. I bought the stripped down power nothing but the motor 2500 quad cab. Any suggestions?
Also how do I put info in my sig. on my posts?
Also how do I put info in my sig. on my posts?
You could also ask them to install a momentary switch somewhere in the truck so you will have a switch inside the truck. Did this on my jeep, works good!
#5
Registered User
Just go to any big stereo shop (BestBuy, Circuit City, Car Toys, etc.) and get a keyless entry or an alarm with keyless entry installed and get them to install door lock actuators. You will be able to lock and unlock the doors with the keypad (comes with the keyless entry kit) on your keychain.
You could also ask them to install a momentary switch somewhere in the truck so you will have a switch inside the truck. Did this on my jeep, works good!
You could also ask them to install a momentary switch somewhere in the truck so you will have a switch inside the truck. Did this on my jeep, works good!
#6
Registered User
Thread Starter
Join Date: Jan 2007
Location: Bean Station, TN
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Nathan who did you use and how much did it cost? I am in Bean Station so anything East of Knoxville within reason will do if the cost is not outrageous.
#7
Registered User
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
CTD NUT
3rd Generation Ram - Non Drivetrain - All Years
3
12-23-2008 08:36 PM
dodgemaniac
3rd Gen Engine and Drivetrain -> 2003-2007
7
06-12-2007 08:21 AM
chuckd25004x4
Performance and Accessories 2nd gen only
9
05-09-2005 06:12 PM