Vibration with rack and pinion
06-07-2013, 06:34 AM
#1
Registered User
Thread Starter
Join Date: May 2013
Location: USA
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Vibration with rack and pinion
I have a 2003 dodge 3500 Cummins heavy duty SLT 2wd with rack and pinion I felt a lot of vibration going over bumps on the I 40 so I replaced all 4 shocks they were bad, I replace the upper and lower ball joints with moog and the inner and replaced the inner and outer tie rods I bought a bad new set of 6 cooper tires and still feel the vibration. My van and dakota dont feel it near as much, is this just they way these trucks are Im not looking for a Cadillac ride but it seems to vibrate too much. Anybody else experienced this?
Thread
Thread Starter
Forum
Replies
Last Post
lawnmaniac883
3rd Generation Ram - Non Drivetrain - All Years
9
04-09-2012 04:43 PM
SKATERHAULER
2nd Gen. Dodge Ram - No Drivetrain
0
02-07-2012 09:20 PM
fishin fever
3rd Generation Ram - Non Drivetrain - All Years
1
06-23-2009 09:30 AM