Uconnect quit Working...
#1
Registered User
Thread Starter
Uconnect quit Working...
I have a factory installed Uconnect that not longer work, It start that when i push the mirror button the radio display (CELL) but no audio hear in the speakers, i suspect for a loose connection and disconnect the radio and check the connectors , everything looks find. Reassemble and now its not working at all.
Any Ideas!!!
Any Ideas!!!
#5
Registered User
Thread Starter
Take the module out!
Take the module out, everything looks ok...connectors Ok, and no obvious damage in the module.
1- would reading the OBDII will give me a failure???.
2-Could disconnecting the radio without disconnecting the (-) battery cable could cause this.?
3- is there a way to reset the module?
1- would reading the OBDII will give me a failure???.
2-Could disconnecting the radio without disconnecting the (-) battery cable could cause this.?
3- is there a way to reset the module?
Thread
Thread Starter
Forum
Replies
Last Post
05DodgeRamGlenn
3rd Generation Ram - Non Drivetrain - All Years
7
05-26-2005 01:37 PM
NJMurvin
3rd Gen High Performance and Accessories (5.9L Only)
1
08-20-2004 11:22 PM
Buff1147
3rd Gen High Performance and Accessories (5.9L Only)
5
04-17-2004 07:49 AM