Show me your debadged Inferno Red Long Bed!
#16
I thought about taking the rams head off the tailgate but I kinda like it.
Have since added a "Longhorn" logo, tailgate, lower left corner.
DeBadged makes them very eye catching!
#19
Originally Posted by motoring
Are there holes under any of the badges?
You can run a length of nylon twine under the "badge" and pull back and forth to remove. Then soak w/ bug and tar remover and scrape with a plastic scraper. I used a plastic knife (Dixie brand I believe, just dull the little cutting teeth on the driveway). You will find that the paint is tougher than you think. Once you get all of the residue off, buff with a soft cloth.
Disclaimer: Be careful and do your homework on this procedure. It's not rocket science, but I don't want anyone to ruin their paint job (and be mad at me)! I've done this to 2 white dodge trucks so far with no regrets.
PS...Do Not use a green scrubb pad by 3m or any other abrasive.
Good Luck
Thread
Thread Starter
Forum
Replies
Last Post
Arkapigdiesel
3rd Generation Ram - Non Drivetrain - All Years
2
08-23-2007 10:52 AM
MoparNut
3rd Generation Ram - Non Drivetrain - All Years
20
04-27-2007 07:32 AM
donhov
3rd Gen Engine and Drivetrain -> 2003-2007
3
04-23-2007 04:29 AM
iflyguns
Towing and Hauling / RV
5
08-14-2006 10:09 AM
iflyguns
3rd Gen High Performance and Accessories (5.9L Only)
11
08-14-2006 12:52 AM