RELOCATING 4x4 SWITCH
06-04-2007, 05:53 PM
#1
Registered User
Thread Starter
Join Date: Jul 2006
Location: Dayton,ohio
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
RELOCATING 4x4 SWITCH
does anyone know if there is a pigtail availble to lengthen the wiring plug on the back of the 4x4 switch.? I want to move it to the right side of the console where the empty space is. so i can mount my cobra cb, on the left side........stock ends up short by about 2''...............
06-04-2007, 07:09 PM
#3
Registered User
Thread Starter
Join Date: Jul 2006
Location: Dayton,ohio
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
nice conversion... except i have an 06 dash. I was thinking of splicing the wires for the extra length, think that would be ok, if the battery is disconnected first, as to not short out anything when cutting wires, and resodering?
06-04-2007, 09:02 PM
#4
06-04-2007, 11:24 PM
#6
Banned
Join Date: Dec 2005
Location: Twin Falls, Idaho
Posts: 5,194
Likes: 0
Received 0 Likes
on
0 Posts
06-04-2007, 11:49 PM
#7
DTR Detective
Trending Topics
06-05-2007, 10:30 AM
#10
DTR Detective
Stacks on a gasser? I don't care for stacks to begin with, but on a gasser?
Mega and TRX4 are not available with a Hemi.
Scroll down to 2500/3500
Mega and TRX4 are not available with a Hemi.
Scroll down to 2500/3500
06-05-2007, 10:38 AM
#11
DTR Detective
Nevermind, found it...
here's the deal... i took a 2500 srw, added arrowcraft dual wheel adapters, ebay bought dually fenders, and hardware, ebay bought tires and wheels.stock single wheel center caps (since they look better than dually caps ) pace edwards jackrabbit tonneu, which i modified 4'' back to allow for the stacks to run through, finished that off with diamond plate cover, to hide the gap... line-x bed, bed rail caps custom cut and elevated to conceal the tonneu edges, since the dodge has a tapered bed. custom made rocker panel lighting, using diamond plate, and kenworth marker lights, added 5000lb super springs to the rear, custom painted to match headlight covers. billet grill upper and lower, added the sport bumber over stock chrome slt bumber, (fit like a glove ).full set of superlift shocks, bores bumber guide lights, and all the chrome......and thats just the outside..........so now i have a 1 ton dually HEMI......................
Oh, and srt 10 hood is in paint as we speak.............
Oh, and srt 10 hood is in paint as we speak.............
06-05-2007, 07:24 PM
#13
Registered User
Thread Starter
Join Date: Jul 2006
Location: Dayton,ohio
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
06-05-2007, 07:27 PM
#14
Registered User
Thread Starter
Join Date: Jul 2006
Location: Dayton,ohio
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
paroxysym
3rd Gen Engine and Drivetrain -> 2003-2007
3
04-02-2008 03:02 PM
The Domie
3rd Generation Ram - Non Drivetrain - All Years
9
06-02-2005 09:28 AM