Rear wheel liners
#1
Rear wheel liners
Got tired of seeing that gap back there so I ordered the liners to put in. Has anyone done this, as apparently the mounting hardware does not come with it?
#2
Registered User
Join Date: Mar 2004
Location: Iowa
Posts: 1,110
Likes: 0
Received 0 Likes
on
0 Posts
On my '05, the mounting clips were included with the rear wheel well liners. Took all of maybe ten minutes to install. However, for my '02 the hardware was not included and I had to come up with my own system.
Mishkaya
Mishkaya
Trending Topics
#9
Registered User
Join Date: Aug 2006
Location: Northern Virginia
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
Just got a set last week from Dodgeparts.com as well.
Shipped to my door they were $78.90.
There was a plastic bag between the two that had the instructions as well as all the mounting hardware. Took about 1/2 hour to remove the existing partial fender well from the factory and install the full fender wells. I don't know why DC doesn't install these on the assembly line!!!!!
Shipped to my door they were $78.90.
There was a plastic bag between the two that had the instructions as well as all the mounting hardware. Took about 1/2 hour to remove the existing partial fender well from the factory and install the full fender wells. I don't know why DC doesn't install these on the assembly line!!!!!
#11
Found the mounting screws, they were sandwiched in between the 2 liners. Got mine for moparpartusa.com for $77.43 for the pair + free shipping. You will need to use the clips from the old plastic guards that you take off..but yeah..they are really easy to install.
#13
Registered User
Join Date: Aug 2006
Location: Northern Virginia
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
The fender well liners state that they are not for use on the SRT-10 or 3500 dual rear wheel trucks. I'd imagine that there are clearance issues with the SRT-10's wide wheels and the inboard wheel on the 3500 DRW's.
#15
Registered User
Join Date: Aug 2006
Location: Northern Virginia
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
It doesn't show anything being available in the MOPAR catalog for the 3500 DRW's. You may be able to adapt the fender well liners for use on DRW's but I've not seen what the bed side looks like or if the attachment points are even there. I'll stop by the dealer tomorrow to see if they have a DRW in stock and take a look.