3rd Generation Ram - Non Drivetrain - All Years Talk about the 2003 and up Dodge Ram here. PLEASE, NO ENGINE OR DRIVETRAIN DISCUSSION!.

RB1/CD changer and Sirius/rca inputs

Thread Tools
 
Search this Thread
 
Old 01-01-2009 | 12:28 AM
  #1  
Pooter's Avatar
Thread Starter
Registered User
 
Joined: Dec 2005
Posts: 2,627
Likes: 0
From: DFW, TX
RB1/CD changer and Sirius/rca inputs

Anyone running Sirius(or Ipod) with an adapter that runs to the factory 10pin on the back of the radio, along with a factory cd changer.
I picked up a Jeep 10disc changer, and id like to wire it up, but keep my sirius/adapter thats also plugged into the factory 10pin spot. Its not a factory sirius tuner/box, its just a sportster plugged in thru a rca adapter.

Is there any way to run both to the rear 10pin plug, with possibly the same multiplex module(5066202AC) for the factory sirius setup?
OR is it just not possible to run both at the same time?

Ive tried searching, here dodgetalk, jeep forums etc, and no one has said whether is possible with the rca input type instead of the factory sirius setup...
Old 01-01-2009 | 04:24 PM
  #2  
Pooter's Avatar
Thread Starter
Registered User
 
Joined: Dec 2005
Posts: 2,627
Likes: 0
From: DFW, TX
Anyone know if they make a 10pin splitter?
Ive been searching the web for a few days with no luck...
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mattk50
3rd Generation Ram - Non Drivetrain - All Years
5
02-25-2008 03:04 PM
truckjunkie
3rd Generation Ram - Non Drivetrain - All Years
3
02-09-2007 05:42 PM
genesis
Performance and Accessories 2nd gen only
6
11-14-2006 12:31 AM
2500Ram
Other
3
11-16-2005 10:15 PM
rob5182
3rd Generation Ram - Non Drivetrain - All Years
14
02-02-2005 06:28 PM




All times are GMT -5. The time now is 02:29 PM.