Radio dies when rolling up all 4 windows?
04-29-2006, 12:26 PM
#1
Registered User
Thread Starter
Join Date: Oct 2004
Location: DFW, Texas
Posts: 706
Likes: 0
Received 0 Likes
on
0 Posts
Radio dies when rolling up all 4 windows?
Im guessing they are on the same circuit and Dodge has always underwired their windows... Anyone else have this problem? I have an aftermarket Navigation unit so Im guessin it pulls a little more power than a stock radio, but today I went to roll up all 4 windows on the truck at once and the radio died and the windows didnt go anywhere. The radio rebooted a couple times and I kept messin around to double check it was the windows that did it. Eventually neither would work.
Restarted the truck and they are fine...didnt blow a fuse, I dont think there is a circuit breaker inline anywhere... anyone got a fix? Higher amp fuse?
Restarted the truck and they are fine...didnt blow a fuse, I dont think there is a circuit breaker inline anywhere... anyone got a fix? Higher amp fuse?
04-29-2006, 03:55 PM
#2
Registered User
I haven't heard of that problem but I would bring in power (fused) from the battery to the Nav and have a relay controlled by the original power hookup from the radio.
MikeyB
MikeyB
04-30-2006, 10:38 AM
#3
Registered User
Thread Starter
Join Date: Oct 2004
Location: DFW, Texas
Posts: 706
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by MikeyB
I haven't heard of that problem but I would bring in power (fused) from the battery to the Nav and have a relay controlled by the original power hookup from the radio.
MikeyB
MikeyB
Thread
Thread Starter
Forum
Replies
Last Post
vintovka
3rd Gen Engine and Drivetrain -> 2003-2007
4
04-30-2012 12:38 PM
Rednecktastic
3rd Generation Ram - Non Drivetrain - All Years
10
11-15-2010 09:29 PM
markster
2nd Gen. Dodge Ram - No Drivetrain
6
10-07-2006 02:20 PM