Question about Ball Joints?
#1
Registered User
Thread Starter
Join Date: Jun 2005
Location: Mid-Missouri
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
Question about Ball Joints?
Anybody ever use the Raybestos Brand Ball Joints?? They would cost me less than $275.00 for all 4! MOOG was priced at $425.00...money is tight just trying to save where I can. Any information would be greatly appreciated.
#3
Registered User
I'm in the same boat...
If they are grease-able what's the worst that could happen? They'd at least be better than stock.
Each set of my OEMs have lasted 35k miles. If I would've greased them with a needle fitting I may have been able to double that, who knows?
I guess it depends on how long you're going to keep your truck too, and if you're going to change them yourself or pay $omeone else every time they go bad. Just some food for thought, but I'm leaning toward a less-expensive but name brand (perhaps with warranty) grease-able set.
Each set of my OEMs have lasted 35k miles. If I would've greased them with a needle fitting I may have been able to double that, who knows?
I guess it depends on how long you're going to keep your truck too, and if you're going to change them yourself or pay $omeone else every time they go bad. Just some food for thought, but I'm leaning toward a less-expensive but name brand (perhaps with warranty) grease-able set.
#4
Registered User
Thread Starter
Join Date: Jun 2005
Location: Mid-Missouri
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
Ok found a deal on some MOOG, one problem...they have the lowers in stock, uppers on back order, not in stock in any of their mid west stores or warehouses!! Just when I finally found them for under $270.00 and greaseable!
#7
I ran moog uppers and lowers, lasted me 60k and had to replace both uppers and pass side lower.I greased every oil change.Just installed carli uppers and they are a very h/d piece. Replaced lower w/ moog ,waiting on carli to release lowers.
Trending Topics
#13
Lasting 60 k on a stock truck that hardly ever goes off road is no my def. of lifetime waranty! The carli ball joints are a lifetime quality ball joint , and eaven if u had to rebuild them u just unscrew the upper portion and slide in new pin no pressing new one in and out!When the lowers come out i am buying a set and will never worry about ball joints again! I run my trucks to 500k or more so im in for the longhaul!
Zack
Zack
#14
Registered User
Join Date: May 2009
Location: Seward, Nebraska
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts