3rd Generation Ram - Non Drivetrain - All Years Talk about the 2003 and up Dodge Ram here. PLEASE, NO ENGINE OR DRIVETRAIN DISCUSSION!.

Poer Door Lock Not working - 2005 Ram

Thread Tools
 
Search this Thread
 
Old 04-19-2008 | 07:38 AM
  #1  
dws35's Avatar
Thread Starter
Registered User
 
Joined: Mar 2006
Posts: 33
Likes: 0
From: Indiana
Poer Door Lock Not working - 2005 Ram

The left rear power door lock has stopped working on my 2005 Ram 3500. The door will not lock/unlock with the drivers button or key FOB. Took it to the dealer they indicated that the actuator is not getting any power. They said that the "power harness" (not sure if that was the right term) needed replaced.

Cost for parts and labor was quoted at $975.

Does this sound right? Is there any other way to repait something like this without replacing the whole assemly. I was thinking it would more likely to be a bad wire or bad actuator.

Any thoughts would be appreciated.

Thx
Old 04-19-2008 | 12:42 PM
  #2  
doorguy's Avatar
Registered User
 
Joined: Aug 2005
Posts: 259
Likes: 0
From: saskatoon,sk
My trucks right rear had the lock quit working and it was a broken wire in the accordian gromet that went from the door to the body. Spliced in some new wire and good to go.
Old 04-19-2008 | 05:09 PM
  #3  
TexasCTD's Avatar
Registered User
 
Joined: Nov 2004
Posts: 5,680
Likes: 2
From: McKinney, TX
Originally Posted by dws35
The left rear power door lock has stopped working on my 2005 Ram 3500. The door will not lock/unlock with the drivers button or key FOB. Took it to the dealer they indicated that the actuator is not getting any power. They said that the "power harness" (not sure if that was the right term) needed replaced.

Cost for parts and labor was quoted at $975.

Does this sound right? Is there any other way to repait something like this without replacing the whole assemly. I was thinking it would more likely to be a bad wire or bad actuator.

Any thoughts would be appreciated.

Thx


$975??? They are smoking crack.

Doorguy may have it right....but,

You probably just need a new door lock solenoid. They cost around $40 or so at the dealer and you can replace it yourself.

https://www.dieseltruckresource.com/...ad.php?t=87151

Read this thread and make note of post #15 "Stew130"s comments about how to replace it.

..
Old 04-19-2008 | 09:01 PM
  #4  
ram 2500's Avatar
Registered User
 
Joined: Feb 2008
Posts: 245
Likes: 0
From: ontario, Canada
i just fixed my door lock and the wires brake that are in the rubber boot that goes from the door to the cab.
Old 05-12-2019 | 01:42 PM
  #5  
SnipeoffYT's Avatar
Registered User
 
Joined: Feb 2019
Posts: 4
Likes: 2
Hey guys we had the same problem, here is how we fixed it--->
Hope this helps
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Artcabinets
3rd Generation Ram - Non Drivetrain - All Years
12
01-09-2010 01:38 PM
Dynocon
3rd Generation Ram - Non Drivetrain - All Years
4
03-04-2008 09:32 PM
staarma
3rd Generation Ram - Non Drivetrain - All Years
0
10-25-2007 01:49 PM
AllonBlack
2nd Gen. Dodge Ram - No Drivetrain
6
07-30-2007 06:51 PM
Marine
2nd Gen. Dodge Ram - No Drivetrain
6
10-22-2005 12:43 PM



Quick Reply: Poer Door Lock Not working - 2005 Ram



All times are GMT -5. The time now is 01:38 PM.