No blinker
#16
1st Generation Admin
I can't believe that even with all the hi-tech diagnostics on these trucks, folks continue to fail to check the basics.
Has anybody checked the Blinker Fluid as high bid suggested above?
Duh ! ?
When mine run slow, I always fill-up with this stuff. Seems to work OK ~ http://kalecoauto.com/index.php?main...&products_id=6
Hope this helps.
Has anybody checked the Blinker Fluid as high bid suggested above?
Duh ! ?
When mine run slow, I always fill-up with this stuff. Seems to work OK ~ http://kalecoauto.com/index.php?main...&products_id=6
Hope this helps.
#17
DTR Founder
#18
Registered User
Well i finally got the dealer. They told me my plow setup wiring triggered a code and shut down power to the blinker. I sliced in the blinker wire for the headlight module on a Meyer's. They said that it may do it again so i'm not sure what caused it and how i can prevent it?
I had the same problem when I replaced the factory bed with a flat bed having more lights. The additional lights pulled more amps than the factory setup so the computer saw it as a short and turned off the circut to avoid burning things up. "Seems kind of redundant I thought that was what fuses were for." Anyhow the dealer changed the computer to let it runs the lights and not see them as a short. This could also be your problem if the plow has additional lights or if it is using the circut to draw any power above what the factory lights would pull.
Thread
Thread Starter
Forum
Replies
Last Post
CORed
2nd Gen. Dodge Ram - No Drivetrain
31
03-30-2007 12:13 PM
ekim440
Towing and Hauling / RV
10
06-10-2006 05:53 AM
dodgedude361
3rd Generation Ram - Non Drivetrain - All Years
9
08-22-2005 07:57 PM
mikmaze
3rd Generation Ram - Non Drivetrain - All Years
8
02-13-2005 12:23 PM