Need install advice from you creavtive types...
#1
Registered User
Thread Starter
Join Date: Jul 2006
Location: Auburn, AL
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
Need install advice from you creavtive types...
I have a bypass filter that does not have a vehicle specific mount.
I've stared at the engine bay and rolled under the truck for hours....I'm stumped.
- Recommend not to mount to the engine
- 7.5 in tall but needs 8 MORE inches for filter removal
- About 6 inches wide(and round).
- Must be mounted above the oil drain plug.
- Must be mounted vertical(and level)
I've stared at the engine bay and rolled under the truck for hours....I'm stumped.
#3
Registered User
Thread Starter
Join Date: Jul 2006
Location: Auburn, AL
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
Here are some pics
Front with label
Bottom showing drain plug.
Bracket height...there is another identical bracket 3 inches below the top.
Bypass height
Here is a link to the installation manual.
http://www.puradyn.com/pdf/PFT_Inst_Man_052306_c.pdf
I'm calling around tomorrow to some of the companies that have them. Hoping one of them installs it on a late model CTD.
Front with label
Bottom showing drain plug.
Bracket height...there is another identical bracket 3 inches below the top.
Bypass height
Here is a link to the installation manual.
http://www.puradyn.com/pdf/PFT_Inst_Man_052306_c.pdf
I'm calling around tomorrow to some of the companies that have them. Hoping one of them installs it on a late model CTD.
Thread
Thread Starter
Forum
Replies
Last Post
92smokin blacky
1st Gen. Ram - All Topics
39
04-07-2010 11:48 PM
FishingFather
3rd Generation Ram - Non Drivetrain - All Years
11
02-03-2007 08:33 AM