Moto Teal 954
04-09-2008, 12:24 PM
#1
Registered User
Thread Starter
Join Date: Jul 2006
Location: Old Hickory
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
Moto Metal 954
Anyone know if the 954's will fit on our trucks with no rubbing. I just orderd Kore leveling Kit. Spec on wheel is 18x9 12mm offset and 4.53 backspacing. I thought i would need at least 5" BS.
04-10-2008, 08:39 AM
#6
Registered User
Thread Starter
Join Date: Jul 2006
Location: Old Hickory
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
Sorry about that. you are right -12mm. I was thinking about either 33x13.50x18 or 35x12.50x18 Dick Cepek FC II or Pro Comp. I also found a decent deal on some BadLands, but they seem to have same measurements. Specks on Badland and 33" say will fit with just leveling Kit. I was wondering if a 12.5" wide tire would work in 35's and leveling kit. I have seen numerous post about obtaining at least 5" BS, so wanted to some info from thoses that have been there.
04-10-2008, 08:53 AM
#7
Registered User
Join Date: Sep 2006
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
i ran 33x13.5R20 baja claw radials on 20x10s with a 4.5 backspacing and it BARELY rubbed when the wheels were cranked all the way. You should be fine. Lots of people run 18x9s and 35s with just a leveling kit.