misterKTM

Finally got a rail car number out of D/C customer service <br><br>Went to the web site (www.uprr.com) and it shows the last update for the rail # (ttgx942264) as last week (march 6). The rep said my truck left the plant on the 7th - a day after the latest update. Don't tell me the rail guys are as bad as D/C on updates to their system ??? ???<br><br>Anyone have any help to offer ?

Drafter

Not much help but when I was tracking mine I found the UPRR web site gave destination points and anticipated ETA's. I found that the ETA's were accurate. The railcar's location didn't update until a destination point was passed. When the rail car transfered to another system I lost the ability to track the rail car by internet and I had to resort to an 800 number. In any case I found either method yielded accurate information including delays.

butchera

You won't see it move until it gets back on UPRR's line. After that, you should be able to track it every few hours. If it changes lines, you will have to use that line's 800 number to find it.<br><br>They told me mine had shipped but it was another two days before the car started to move.<br><br>Have fun tracking it once it goes.<br><br>

Vaughn MacKenzie

MisterKTM, your truck pulled into Pt. Laredo, TX

TTGX942264 Load Yes Arrived Ptlaredo, TX 03/13/03 22:30

Mine went through there a couple days ago. It is still in Texas. Union Pacific really takes its own sweet time! It went by Waco today and then just left Hodge, TX a few minutes ago which is near Abilene. It went a few miles today anyway.

Check out my thread on the shipping subject.

Vaughn

Vaughn MacKenzie

Now MrKTM's Ram is in Wagstaff Kansas. That's just outside Kansas City. Gettin' closer dude <br><br>Mine went through there a couple days ago. After KC it went to Marysville into Nebraska then to North Platte and now mine's in Cheyenne Wyo. Yours should follow the same route.<br><br>Vaughn

misterKTM

yeah, I've been tracking it...sure seems to stop at a lot of little 'bergs'. Been moving almost constantly - but pretty slow pace....slow and steady, lets not got in any hurry here :

FUNX4ME

Mine is sitting in Belvidere,Ill. right now waiting to be unloaded off the train.It stoped a couple of times along the way and sat for three or four days each time.I sure wish they would speed it up a little.This wait is getting to me

misterKTM

FUNX4ME,<br><br>You need to wait another entire month to catch up to me ! I ordered 12/21 !!!!

FUNX4ME

mister KTM-if i had to wait as long as you have i would really be pi$$ed.I hope yours comes on along without any 3 or 4 day layovers.Just checked on mine again and it has been unloaded,maybe it won't be long now.Good luck with yours

Jeff_OH

Does anyone know what a status of KZT really means? <br><br>KZT second rail departure <br><br>Second rail departure? What was the first one? Did a trace on UPRR and the rail car is empty.<br><br>TTGX992121 Empty P Interchange Delivered TFM Laredo, TX 03/16/03 17:19 Silao, GJ <br>