Cummins600

Is it just my 4x2 truck? The passenger front side of my truck at the fender wells sets an inch lower than the driver side. It was an inch off before the level kit and after too. Is this normal for or trucks? Could I have a bad spring? Looks like this side could be heavier with the exhaust and such.

marc03

mine is about 1/4 to 1/2 inch off.

Cummins600

Interesting to see how the 4x4 trucks differ from the 4x2 trucks.

MikeyB

How much fuel is in the tank?

MikeyB

Cummins600

Full or empty - no change.

MikeyB

Only notice mine doing it when it gets low on fuel.

MikeyB

jeffahart

Frame could be bent. My good friend had a brand new ford that looked like that from the rear. Dealer put some washers under the bumper then there was an ugly gap between the bumper and frame it was funny! He got sick of fighting with dealer and took it to a frame shop and they straightened it. Dealer would not pay because their Morons did not find the problem. Apparently they can bend a frame during rail head. Probably sinching them down with a cheater bar.

Jef

C4 Max

If some moron can bend the frame with a cheater bar on a binder, that does not make me feel any better about pulling or hauling anything.

nriver

my 4x4 is about a inch different side to side