DYI A/C blend door
#1
Registered User
Thread Starter
DYI A/C blend door
Anyone replaced/repaired the a/c blend door themself?
Mine broke in August, and I need to fix it before next summer.
I'm still in warranty, but I don't know any dealers or techs around that I'd trust to do it properly without tearing up the rest of the truck. Besides, they'd probably want to keep it longer than I could afford to have it idle.
Mine broke in August, and I need to fix it before next summer.
I'm still in warranty, but I don't know any dealers or techs around that I'd trust to do it properly without tearing up the rest of the truck. Besides, they'd probably want to keep it longer than I could afford to have it idle.
#5
Registered User
Join Date: Jul 2004
Location: California
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
Registered User
Thread Starter
Of course - but I hate to take it to a dealer with techs I don't know/trust...
I NEVER let anyone touch my equipment for any reason, at any time, unless I can WATCH them and usually HELP them!
The thought of some neophyte dismembering my beautiful, expensive truck makes me apoplectic.
I know some excellent Techs, but not in my neck of the woods.
I NEVER let anyone touch my equipment for any reason, at any time, unless I can WATCH them and usually HELP them!
The thought of some neophyte dismembering my beautiful, expensive truck makes me apoplectic.
I know some excellent Techs, but not in my neck of the woods.
#9
Registered User
Join Date: Dec 2002
Location: East Montpelier, VT.
Posts: 1,055
Likes: 0
Received 0 Likes
on
0 Posts
That was an excellent write up. I have a small rattle way underneath the dash. I have had it pretty much all apart except the steering column drop hence I couldn't really pull the top off completely. Never found the rattle...yet.
Just a big pain. All comes apart pretty easy but still a pain. At least I didn't end up with extra screws left over after putting it all back together.....this time...
Just a big pain. All comes apart pretty easy but still a pain. At least I didn't end up with extra screws left over after putting it all back together.....this time...
Thread
Thread Starter
Forum
Replies
Last Post
Wes in TN
24 Valve Engine and Drivetrain
19
02-10-2006 05:50 AM