Custom sub enclosure pic's please!
#1
Registered User
Thread Starter
Join Date: May 2006
Location: Waxahachie
Posts: 1,163
Likes: 0
Received 0 Likes
on
0 Posts
Custom sub enclosure pic's please!
Can ya'll post up some pic's of custom sub boxes in your 3rd Gen QUAD CABS? I know of the ones you can buy but I want to see what ya'll have created on your own!!!
#2
I'll have a picture up by the end of the week. I made my own hybrid fiberglass/mdf enclosure for two alpine type r 12's. It's been in there for over 2 years, but last weekend i decided to take it out and give it a little more air space. I'm almost finished. Just a few layers of fiberglass to join the two sections and i'll snap some pictures. If i may ask, what size and how many are you wanting to put in yours?
#3
Registered User
Thread Starter
Join Date: May 2006
Location: Waxahachie
Posts: 1,163
Likes: 0
Received 0 Likes
on
0 Posts
1 or 2 10's. I can't decide between Crossfire, Kicker L7, JLw3 or Treo. Most people haven't heard of Crossfire or Treo but they are the cat's meow! If I go w/the Crossfire or Treo I'll only need one but just one of them will cost the same as 2 of the others.
#4
what are their mounting depths? the 12's i have are 7.7" mounting depth. With the carpet still in the compartments I have to jack my seat up about an inch to fit those subs. Besides that, the magnet and housing are almost hit in a couple of spots. I could have taken the carpet out and fit them a lot easier, but i wanted to keep the carpet to keep the shakes and rattles down. Plus it saves money over a sound dampening material to avoid having fiberglass on metal contact.
#6
Registered User
Join Date: Oct 2005
Location: Georgetown, TX
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
Here is what I built for my 10". Most of the ready made ones for under the left seat would not fit with the passenger side fold flat tray. The top section goes all the way to the back wall for added air volume.
Trending Topics
#8
Registered User
Thread Starter
Join Date: May 2006
Location: Waxahachie
Posts: 1,163
Likes: 0
Received 0 Likes
on
0 Posts
[QUOTE=clemson725;2430853]what are their mounting depths? the 12's i have are 7.7" mounting depth.
Right about 6". One of the Treo 10's weighs 260oz., that's over 16lbs.
Right about 6". One of the Treo 10's weighs 260oz., that's over 16lbs.