Best $2.77 AC mod.
#46
Registered User
I'm with you on the "still too hot" to do this fix thing Rednax! My garage faces to the NW, and I like to do this sort of work in the late afternoon/early evening hours, but the Sun doesn't cooperate with me on these things! But after Labor Day, I'll swing by Grainger's,and pick up some of this insulation & the tape you put a link up for. Then I'll attempt this fix early in the morning, before it gets hot. I might even do the bypass fix while I'm at it. Grainger's has everything--gotta love that!
#47
Finally broke down and did the mod this morning. Here are my comments, good and bad...
-- Ordered the insulation from Grainger, awesome price on the unit, but $13 to ship , oh well.
-- Couldn't figure out how to get the battery tray or air box out, had to work around them. I removed the air box lid and battery to give me more room to work.
-- Because of last comment, I lost about a 6" piece of the insulation I was trying to install behind the battery tray (it fell into the "black hole" that is the wheel well), which meant I was short that amount for part of the rest of the job. For the price and shipping, I'd order two units next time.
-- Otherwise, the install went pretty well. More time consuming that I anticipated, but luckily it was a nice day outside.
-- I concentrated first on the line from the firewall that runs behind the battery tray and air box. I only insulted up to the air box, no further. Used a zip ties where it made sense to help keep things secure, like around the elbows and other area where the split didn't seem to want to stay joined.
-- I used the leftover insulation to then insulate the other lines that are coming off the condensor until the product was used up. Again, had about a 6" area that I couldn't cover.
I haven't driven the truck yet, and the weather is finally starting to cool down so I'm not sure if I'll have a chance to fully test. I'm not sure if this will give me the "hang raw meat from the ceiling" kind of cold air I need in the Phoenix summers, but I'm sure it can only help. It was easy enough to do, so I'd recommend to do it again.
ben
-- Ordered the insulation from Grainger, awesome price on the unit, but $13 to ship , oh well.
-- Couldn't figure out how to get the battery tray or air box out, had to work around them. I removed the air box lid and battery to give me more room to work.
-- Because of last comment, I lost about a 6" piece of the insulation I was trying to install behind the battery tray (it fell into the "black hole" that is the wheel well), which meant I was short that amount for part of the rest of the job. For the price and shipping, I'd order two units next time.
-- Otherwise, the install went pretty well. More time consuming that I anticipated, but luckily it was a nice day outside.
-- I concentrated first on the line from the firewall that runs behind the battery tray and air box. I only insulted up to the air box, no further. Used a zip ties where it made sense to help keep things secure, like around the elbows and other area where the split didn't seem to want to stay joined.
-- I used the leftover insulation to then insulate the other lines that are coming off the condensor until the product was used up. Again, had about a 6" area that I couldn't cover.
I haven't driven the truck yet, and the weather is finally starting to cool down so I'm not sure if I'll have a chance to fully test. I'm not sure if this will give me the "hang raw meat from the ceiling" kind of cold air I need in the Phoenix summers, but I'm sure it can only help. It was easy enough to do, so I'd recommend to do it again.
ben
Thread
Thread Starter
Forum
Replies
Last Post
Kenworth
Performance and Accessories 2nd gen only
2
07-15-2008 04:18 PM
jmccart
3rd Gen High Performance and Accessories (5.9L Only)
4
12-19-2007 12:49 AM
jamesbfishin
3rd Gen Engine and Drivetrain -> 2003-2007
6
07-07-2007 08:25 PM
wap
3rd Gen High Performance and Accessories (5.9L Only)
14
04-23-2007 06:46 PM
RAMV
3rd Gen High Performance and Accessories (5.9L Only)
9
07-14-2004 12:08 PM