Anyone Try One of These on an '03??
#16
Thats MR Hoss to you buddy!
Thread Starter
Re:Anyone Try One of These on an '03??
[quote author=FiverBob link=board=17;threadid=17729;start=0#msg166075 date=1059611535]
Hoss,
Here is a shot from the side. Shows the design pretty good. This unit had three (?) set screws in it - - I just tightened them down. I could not move it before I tightened them.
I purchased this at the Hitch House where I have found several items for the truck. If you like them let me know and I will call them for a brand name. It was not cheap but it is excellent quality. One reason I liked this design was that I cut my leg twice on the stock pipe and my sis-in-law cut hers once. She did not have nice things to say about my dumb truck. This tip will not cut you.
Bob
[/quote]
I think I have a lot more space between my rear wheel well and the rear of my truck than you do. Why is that?? My tailpipe appears to be WAY back behind the wheel....where yours appears to immediately behind the wheel. Is that a DRW vs SRW thing or something??
Hoss,
Here is a shot from the side. Shows the design pretty good. This unit had three (?) set screws in it - - I just tightened them down. I could not move it before I tightened them.
I purchased this at the Hitch House where I have found several items for the truck. If you like them let me know and I will call them for a brand name. It was not cheap but it is excellent quality. One reason I liked this design was that I cut my leg twice on the stock pipe and my sis-in-law cut hers once. She did not have nice things to say about my dumb truck. This tip will not cut you.
Bob
[/quote]
I think I have a lot more space between my rear wheel well and the rear of my truck than you do. Why is that?? My tailpipe appears to be WAY back behind the wheel....where yours appears to immediately behind the wheel. Is that a DRW vs SRW thing or something??
#17
Thats MR Hoss to you buddy!
Thread Starter
Re:Anyone Try One of These on an '03??
[quote author=lschultz link=board=17;threadid=17729;start=0#msg166482 date=1059678682]No I don't have a picture of it yet.Did not have to cut any of the factory pipe.It sticks out a little farther but very little.My bumper does not get black on it anymore.Very tight fit.
[/quote]
Thanks for the info. Maybe I'll just have to break down and buy one.
[/quote]
Thanks for the info. Maybe I'll just have to break down and buy one.
#18
Proprietor of Fiver's Inn and Hospitality Center
Re:Anyone Try One of These on an '03??
[quote author=Hoss link=board=17;threadid=17729;start=15#msg166854 date=1059745987]
I think I have a lot more space between my rear wheel well and the rear of my truck than you do. Why is that?? My tailpipe appears to be WAY back behind the wheel....where yours appears to immediately behind the wheel. Is that a DRW vs SRW thing or something??
[/quote]
Don't know about any change in spacing between SRW or dually. The SRW's I have seen did not seem any different in the pipe spacing. That tip of mine is a BDS. Very heavy grade stuff.
I think I have a lot more space between my rear wheel well and the rear of my truck than you do. Why is that?? My tailpipe appears to be WAY back behind the wheel....where yours appears to immediately behind the wheel. Is that a DRW vs SRW thing or something??
[/quote]
Don't know about any change in spacing between SRW or dually. The SRW's I have seen did not seem any different in the pipe spacing. That tip of mine is a BDS. Very heavy grade stuff.
#19
Thats MR Hoss to you buddy!
Thread Starter
Re:Anyone Try One of These on an '03??
Maybe it's just my imagination.... :
Thanks for the info. I'll see what I can find on it.
Thanks for the info. I'll see what I can find on it.
Thread
Thread Starter
Forum
Replies
Last Post
95ram
3rd Generation Ram - Non Drivetrain - All Years
7
04-05-2008 06:18 AM
arroyojim
Performance and Accessories 2nd gen only
6
09-05-2006 10:40 PM
arroyojim
Fuels / BioDiesel / Diesel Prices
3
09-04-2006 04:04 PM
CUMMINSBILL
3rd Gen High Performance and Accessories (5.9L Only)
2
04-21-2004 03:03 AM