JeepManIowa

I installed Fog lights on my truck (the factory one). My fog lights work on both Low and High beams.

ChrisJohnson

Just did mine this morning. Mine was already pre-wired. Took about 45 min. to do it. The fog lights work on high and low beam. The parts guy said I would have to have the truck re-programmed, but I knew better. If you have the dealer program it, the fog lamps will not work on high beam. Your best bet is to install the lights yourself (real easy), then see if they work. If they don't work, then take it to the dealer to program. Like I said before, it was real easy to install. Could have done it even quicker if it hadn't started raining while I was doing the install.

rockjeep

You can't do it. If dodge wanted us running more lights they would have offered it. Ok just kidding. I have the factor fogs. I put in the bright box set to keep the low beams and fogs on with the hi beams. I also put 6 kc lights up front. The relays are triggered by the hi beams.

Kory

booman70

You can wire the fogs to stay on in the relay box
https://www.dieseltruckresource.com/...ogs+high+beams

n2moto

Hey RockJeep

Where can I find the Randy Ellis light bar you've got? It's the closest thing I've seen to what I'm looking for. How did you mount the two lights in the lower center?

Thanks

07Blue2500

So what's the consensus on the 04.5-08 SLT or higher trucks?
Is the ECM already enabled for the fogs?

Can find the 'Mopar pre-wired kit' on Inet for abt $130 delivered.
Sure beats the $275 the dealer wants

booman70

My 04 was I just plugged in the lights put in the new headlight switch

ptgarcia

Mine was already programmed. Mine were even programmed to stay on with the high beams.

rockjeep

I got it stright fro Randy Ellis. The lower lights are mounted in the factory holes for the license plate. My plate fell off in a snow bank, so I had two holes and the lights fit perfect. All are wired to the high beams.

Halibrand

06 ST and 03 SLT, all plug and play, both stay on with highbeams. No crazy harnesses or relays or extra drilling.

TNLoneWolf

I installed the factory light kit, mine was wired from the factory. Very easy install, mine only work on low beam thou....