JOECUMNS

Anyone got pics of where they mounted their Maglight Flashlights in the cab?

Need95-00CTD

I'll get one of mine up soon, its mounted on the center console lid. You just have to make sure its bolted through, not screwed in, it'll pull out otherwise.

wildcat

Here's mine:

cgmorgan06

My maglight wouldnt know what to think if I had a mount for it. The door panel pocket is just perfect for the 2-cell version I carry.

gus's 03

i keep a mag charger in the truck mounted between the seat base and the door sill. these are much brighter than a 6 cell, but physicly about the size of a 3 cell. its wired to the cigerette lighter circuit.

sorry for the poor cell phone pic at night.. but you'll get the point.

nriver

I carry a 4 d cell in the door pocket...

spitfire9137

Rechargable Maglight mounted on floor by drivers seat. I didnt want to screw the bracket to the floor so I made up a T shaped bracket, used machine screws to hold the light bracket to the T shaped bracket and bolted the other end down using the seat belt bolt on the floor behind the drivers seat.

bdog

I used to be a mag lite guy with one mounted in the truck but these new flashlights are so much better. I am talking about the surefire, etc. Way brighter and way smaller. I have a flashlight that fits in a shirt pocket that is brighter than a 4 cell mag lite and it has a 1 hour run time as well.

RRAMctd

I just put my on, took about 3 min and 5 min to find my stuff to do it. I love tek screws.

torquefan

Good idea with the bracket. I hate drilling holes through my floor too.

RacerDude

Here's mine, works good for me.....

06 DIESEL

What did that take to do? I want to mount mine out of sight like that but could not find the correct stuff.

RRAMctd

find a piece of flat metal not to think, I used a piece of angle from my overhead doors that was extra. needs to be about 15", screw that with self tapping screws to seat brackets, just below the seat slide. Then space your light clamps on that 4 more screws and your done. Unless you know the light is there you will not see it. tht flap hangs down just like factory. I used #8 screws about an 1" long.

06 DIESEL

Thanks, where did you get the clamps at? I have everything but the clamps.

RRAMctd

I should have figured that was what you were really asking for as its the key part to get mounted nicely. I had a local parts store order me a set. I have one other set that I got in the kit with the light. I see you can get them here. http://www.shopping.com/xDN-flashlig...brand_mag_lite I did a google search on mag light mounts. never dissapointed with what google can find.