4" oval step bars
#1
Registered User
Thread Starter
Join Date: Jun 2008
Location: Rock Springs Wyoming
Posts: 187
Likes: 0
Received 0 Likes
on
0 Posts
4" oval step bars
Hello all i received a set of 4" oval step bars for christmas and they are from dodge the part number is 82209623AE i went to install them on friday night but when i took them out of the box there was no instructions in the box i went to my local dodge dealer sat morning to see if by chance they had a set but no dice and they say they can not get a set of instructions and they will not take the step bars back because the box has been opened. Anyway what i need to know does anyone on this board have a set of instructions or know where i can get a set off the internet. thanks in advance.
#2
Registered User
The dealer as usual is lying too You unless Chrysler has changed.I did all the new car PDI at a dealer for 15yrs and if any accessories were missing the instructions the dealer could call Chrysler with the part number of the accy and they would fax them to the dealer.
#3
Registered User
Join Date: Aug 2007
Location: Johnson City, TN
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
Whiteeye42,
Try this link, http://www.mopar-accessories.com/en-...ubGroupId=3157, There is a pdf file on that page that I believe are the instructions that you need. If the link does not work, send me an email at rconkin@comcast.net and I can email the pdf file to you.
Try this link, http://www.mopar-accessories.com/en-...ubGroupId=3157, There is a pdf file on that page that I believe are the instructions that you need. If the link does not work, send me an email at rconkin@comcast.net and I can email the pdf file to you.
Thread
Thread Starter
Forum
Replies
Last Post
PEAKSTRYDE
Suggestions, Comments and Site Questions
1
10-11-2007 04:20 PM
jeffcall7
3rd Generation Ram - Non Drivetrain - All Years
7
03-16-2007 04:38 PM
05HDRAM
3rd Gen High Performance and Accessories (5.9L Only)
7
01-11-2007 08:41 AM
pet05
3rd Gen High Performance and Accessories (5.9L Only)
0
06-16-2006 03:58 PM