wrm

Does anyone know the part number for the heaviest frong springs for a 06-3500? Thanks

JWash1

Try the Skyjacker D25's. They give you a 2 to 2.5 inch lift.

wrm

i want to use stock parts if possible.

FirstDodge

wrm . . . is yours bottoming out over bumps? There are several posts right now with people trying to figure out what to do to their '06's to keep the front from hitting bottom over small bumps (search on "06 bottoms out help"). I have that problem with my '06. Or are you looking for heavier springs for another reason?

BlueDually

The last numbers are .......88a, on the mopars. you probably have a 85 on the passenger side, 86 driver side

wrm

want to use winch and dont want the truck to sit any lower than it is now

FirstDodge

My passenger side spring number is 52121621AA. Wonder what that means?

FirstDodge

I doubt that a winch will make it sit any lower. Mine doesn't seem to be any different with it on or off . . . .at least I can't notice it.

dodgeboy59td

Try the springs off of a Cab and Chassis truck, i know that they are stronger cause they ride rougher. Wes

wrm

i still would like to know the whole part numbers if any one has them . idid not know left and right springs had different numbers. thanks for that info

Timmer

dang Firstdodge, that thing looks sweet with the sun bursts off of it, can you do that to my truck?

The_Brute

Firstdodge - Where did you get the front hitch that the winch is on? I have the same multimount setup and like how high up yours sits. I assume the Hidden hitch is the lower one?

FirstDodge

You are right . . .the lower hitch is the Hidden Hitch. I use if for hauling other gear . . . and am working on a rack that will hold my sons 90cc ATV up there .

The other hitch is from Bodiak. Go to www.bodiak.net and you will see them. It fits right over the tow hooks. I painted mine to match the factory color. I also used the Randy Ellis light bar, but had to fab it by welding it to the Bodiak as the light bar from Randy Ellis also mounts behind the tow hooks. I really like the set up . . it works out nice.

FirstDodge

I was having my heater block cord installed today and told my service guy at the dealer that several were having issues with the '06 front suspension. He said that it might become a recall. I asked him how DC got the information, and he said from repair requests and phone calls into the customer service line. I might give customer service a call and see what they say. I'm not holding my breath

zip

I talked to my dealer today and the service manager said he would look in to it after x mas I am not going to let this lay down and die I dont think I should have to buy after market springs because it is under sprung. my wifes new tundra does not bottom so neather should mine .I WILL KEEP YOU GUYS INFORMED