06 fog light switch install
#4
on my 04.5, after removing the lower part(above your knees) i had to unsnap(makes a horrible sound) the panel where the switch is screwed into.
i know the 06 is a different dash though
i know the 06 is a different dash though
#6
Registered User
Join Date: Apr 2006
Location: Fontana, CA
Posts: 5,776
Likes: 0
Received 0 Likes
on
0 Posts
I was able to do it by removing the lower panel then loosening the upper panel and squeezing my hand in to get the job done. But you risk damaging or deforming the upper panel this way. But to get the upper panel off you have to remove all the panels around the radio. I was too impatient so I risked it.
Trending Topics
#8
I was able to do it by removing the lower panel then loosening the upper panel and squeezing my hand in to get the job done. But you risk damaging or deforming the upper panel this way. But to get the upper panel off you have to remove all the panels around the radio. I was too impatient so I risked it.
it's a pain to get all the other junk off
#9
Thread
Thread Starter
Forum
Replies
Last Post
Flying Ram
3rd Gen Engine and Drivetrain -> 2003-2007
5
01-31-2009 09:10 AM
ollie32
3rd Gen High Performance and Accessories (5.9L Only)
2
08-29-2008 08:44 AM
MaroonCumminsInOre
2nd Gen. Dodge Ram - No Drivetrain
2
09-21-2004 07:35 AM