03 2wd sagging front end
#1
Registered User
Thread Starter
Join Date: Mar 2005
Location: Houston
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
03 2wd sagging front end
The front of my truck is sagging a little. I went to have it aligned and they told me the front had sagged too far to get it in spec. I'm wondering what the best solution is for getting it where it belongs. I see little spacers for leveling but it seems like replacing the front springs might be a more difficult but better way to go. Any thoughts appreciated. I would also like to add a heavier front bumper to the truck in the future.
#2
Registered User
I did the spacer route using the Daystar 1.5" lift. If planning to install a heavier front bumper I recommend getting new coil springs with a higher spring rate.
Thread
Thread Starter
Forum
Replies
Last Post
Swamp_Donkey
3rd Generation Ram - Non Drivetrain - All Years
5
03-10-2008 05:01 AM
royta
Towing and Hauling / RV
28
02-12-2007 11:04 AM