Need a little help here. I am putting my 09 back to stock. Had the dpf delete pipes and smarty jrme. Just got done putting all the heavy restrictive junk back under the truck and put in the stock program. My question is...On the smarty jrme by putting in the stock setting is it truly going back to stock, with the regen and egr enabled or is it still shut off and just running stock power since my jr did have the me program.

 

If you return to stock with the Smarty it removes all of the aftermarket tuning and goes back to just that, stock.

 

Thanks,
Just wanted to make sure as it is going down the road on Tuesday and I did'nt want it locked up with the programmer. Everything went back in and I did'nt get any check engine light so I guess all is good.

 

Glad to hear this has went well so far. Do you mind if I ask what reason you're going back to stock. I suppose for an inspection or something? Let us know how it goes while you're stock (no CELs so far - great). Are you going to go back to non-stock again at some point?

 

Sounds to me like a pending sale.

 

Trading it on a 2010, that I plan on doing the deletes as well. I assume the delete pipes will work on the 2010? Now I just have to wait for Mads go get on the ball and get the jr to work on 2010 models, otherwise I need to get some of the sims to run the delete pipes. I would look at a h&s programmer but I think my wife would either divorce or shoot me, maybe both.

 

didn't you like the 09? did you have it dialed in?

 

I liked alot of things about the 09, but I like the looks of the new body style better. One thing I disliked about the 09 was the seats. I had the cloth interior and they were very uncomfortable, probably the worst seats of any vehicle I have ever owned, and I have had a few.

 

I hear ya...how did you like the smarty jr w/deletes? did it work well for you? i'm getting close to doing the same on my 07 6.7

 

It ran great, mileage went up and I did'nt have to deal with the constant regens

 

thanks vess.....good info, my truck has right over 40k, bone stock runs real good but i want it to breathe......one more quest. how did you seal or secure the plugs for the exhaust sensors on the frame

 

Im sure the 09 was great, but have you rode in a 4th gen...

Man they are impressive!

 

OK, I am a bit jealous. Ya, those 3rd gen seats do stink. At least I got the same drivetrain...

 

As far as the sensors I taped them up with electrical tape and zip tied up out of the way. I am ready to do the same thing on my new truck. Any body have any idea if and when the smarty Jr. is going to be compatible with the 2010?

 

thanks vess...are they easy to unplug?