Dodge 6.7 over 600HP
#3
Banned
Join Date: Jan 2007
Location: Cleveland, Tx/ Huntsville, Tx
Posts: 1,616
Likes: 0
Received 0 Likes
on
0 Posts
Yep the above is the most I have heard of on a factory 6.7L. I have heard of Reb brown using a 6.7L bottom end I believe with a 5.9L head and they were able to see around the 1,000hp range but then had a problem with snapping rods due to the rod angle. Maybe Eric from Browns diesel will chime in and elaborate.
#5
Registered User
Join Date: Dec 2006
Location: Green River, WY
Posts: 677
Likes: 0
Received 0 Likes
on
0 Posts
#6
Chapter President
Join Date: Apr 2007
Location: misplaced Idahoan stuck in Albuquerque, Roughneckin on RIG 270
Posts: 9,375
Likes: 0
Received 7 Likes
on
5 Posts
Yep the above is the most I have heard of on a factory 6.7L. I have heard of Reb brown using a 6.7L bottom end I believe with a 5.9L head and they were able to see around the 1,000hp range but then had a problem with snapping rods due to the rod angle. Maybe Eric from Browns diesel will chime in and elaborate.
#7
Registered User
Thread Starter
Join Date: Apr 2006
Location: Texas
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Pdi
No I just found it today the truck belongs to Performance Diesel Inc they did 618 at the rear wills with injectors, turbo, and an edge box check out the link they have on youtube. They said that they are working on it more to get even more power and that it will be coming up in Diesel Power! My hats off to them.
http://www.youtube.com/watch?v=ru4UZbsyFAY
http://www.youtube.com/watch?v=ru4UZbsyFAY
Trending Topics
#14
Registered User
Thread Starter
Join Date: Apr 2006
Location: Texas
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
I talked with PDI today they said that they got the dual cp3 done. They said with the edge box it only make 5HP more nothing impressive. But they are trying for some custom tuning that should allow it to go all out and use some more fuel in hopes to make 675+...We'll have to see
#15
Registered User