I know these ?s have been asked before but I couldnt find them so sorry for the repeat. I just added my commander to my x2 standard and when I did I only have levels 0 1 2 3 instead of 0 1 2 3 4 with the little pod display i had before the commander. Anyone know why or what the hp levels are now? and I could monitor rail pres. with the little pod and I either cant find it in the commander or it doesnt monitor it. Can anyone help me? If you can monitor rp. how do you get it to be on the screen? If not its alright. Also what about the power levels? how come you lose one with the commander? I am pleased with the x2 and the display of the commander just curious. the power of the x2 is smooth and bada$$.

 

I answered your other thread.....

 

yah I saw that and sorry i put the other one in the wrong place. but thanks for the info. how do you put rp on the screen?

 

Did you buy the fuel pressure kit for the Commander? Don't think you can monitor rail pressure on the Commander without the harness from the fuel pressure kit.

 

I did get the fuel preas kit but havent installed it yet. I plan on doing that tomorow. It looks pretty easy though.

 

It's easy. The harness in that kit will tap the rail pressure sensor, either with a scotch-lock (I think that's what they're called) or via a provided connector if you have the new harness for the X2. Until that's installed the Commander can't read rail pressures, only the Control Pod will.

 

yep Pauly's right...I saw the FP kit listed in your sig so I figured it was installed already......get it in and you should be good.

 

thanks yall I really appreciate it. that helps out a lot. I will put it on tomorow. thanks for all the input. so I guess you do loose a level when you use the commander. but I cant find any info on this anywhere. so that should be off 45hp 65hp and 100hp right.

 

No, it is off 25, 45, & 65HP. The PL4(100HP) is the one you can't get w/ the Commander controlling it. That's why I still use the pod. PL4 is really the only one I'm concerned with. They R supposed to be making an update for the Comm. but who knows when.

 

From what I understand from a post that I saw a few months ago, with the Commander controlling the X2 you only have the 3 highest levels. So with the std X2/Commander you only have 45-65-100hp. I remember Quad answering this questions with these numbers. Hopefully he might chime in and clear the air!!! In the mean time I will try to find this post.....

 

Here is a partial answer that I found....

https://www.dieseltruckresource.com/...ight=Commander

 

And another....
https://www.dieseltruckresource.com/...ight=Commander

 

so with the commander and the x2 you are able to change between off and the last 3 levels. which would be 45 65 and 100hp? I hope that this is what it is.

 

That is correct. You have the upper 3 levels.

 

Without final confirmation from Qzilla, I say YES. That is the information that I was led to understand.....