What would it take to build a dual cp3 setup
#1
Registered User
Thread Starter
Join Date: Aug 2006
Location: Fort McMurray, Alberta
Posts: 5,426
Likes: 0
Received 0 Likes
on
0 Posts
What would it take to build a dual cp3 setup
Ok, I have 2 CP3's 1 is stock, the other is a stage 2 IIS. I am wanting to go to a dual cp3 setup, and if possible I would like to take advantage of these units I have
Any help on this would be greatly appreciated
Kevin
Any help on this would be greatly appreciated
Kevin
#4
could you call one of the dual pump makers and have them send you all the parts except the pumps?
maybe II could take both the ones you have and give you back two modded ones or two stockers???
or are you talking about homemade duals??
doesn't PPE have some "special control box" they have to used to make both pumps work together?
maybe II could take both the ones you have and give you back two modded ones or two stockers???
or are you talking about homemade duals??
doesn't PPE have some "special control box" they have to used to make both pumps work together?
#5
Registered User
Thread Starter
Join Date: Aug 2006
Location: Fort McMurray, Alberta
Posts: 5,426
Likes: 0
Received 0 Likes
on
0 Posts
thats a good question,, I dont really know the answer to that,, I will have to try doing some phoning next week and find all that out
Kevin
Kevin
#7
Trending Topics
#8
#9
Registered User
Join Date: Jan 2006
Location: TEXAS
Posts: 1,618
Likes: 0
Received 0 Likes
on
0 Posts
yes, I have seen a PPE 'control box' for lack of a better term. almost all twin cp3 kits I have seen have the controller box, I think it controls the signal to the ECM, so it doesnt throw a fit. all it needs is a power and ground to operate
hope this helps
hope this helps
#12
Registered User
Join Date: Jan 2006
Location: Marshfield, Missouri
Posts: 2,191
Likes: 0
Received 0 Likes
on
0 Posts
im not sure but I remember seeing someone else on another board trying a diy kit and they couldnt get the plugs they needed to make it happen. If chris will sell you a box that might be your best bet. Good luck and let us know.
#13
Registered User
Thread Starter
Join Date: Aug 2006
Location: Fort McMurray, Alberta
Posts: 5,426
Likes: 0
Received 0 Likes
on
0 Posts
Yeah I am going to have to do some calling around, I sent an email off to IIS, I will call some of these other guys and see.
In a dual cp3 setup, is it usually 2 stock cp3's or modified ones?
Kevin
In a dual cp3 setup, is it usually 2 stock cp3's or modified ones?
Kevin
#14
Registered User
Join Date: Sep 2005
Location: Salem,IN
Posts: 287
Likes: 0
Received 0 Likes
on
0 Posts
#15
I think you can do either what ever you want at least that is what it says on II's site.