Van Aaken c3.2
06-04-2007, 07:03 PM
#1
Registered User
Thread Starter
Join Date: Jun 2004
Location: Rockwood ontario
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Van Aaken c3.2
Hey guys,
Just got in my c3.2 and hooked it up. Goes like stink except the switch function doesn't work. It seems like its on full all the time. I've checked all connections etc and the switch doesn't need to be grounded. Has anyone had a similar problem?
Just got in my c3.2 and hooked it up. Goes like stink except the switch function doesn't work. It seems like its on full all the time. I've checked all connections etc and the switch doesn't need to be grounded. Has anyone had a similar problem?
06-04-2007, 07:59 PM
#2
Registered User
Join Date: Aug 2006
Location: Albuquerque, NM
Posts: 1,007
Likes: 0
Received 0 Likes
on
0 Posts
It should work fine if the switch is plugged in. If the switch is not plugged in, then it's in performance mode. Bad switch?
If it's stuck in performance mode, the EGT's go through the roof in no time. Mine does and I have a SuperB and 4" muffler.
If it's stuck in performance mode, the EGT's go through the roof in no time. Mine does and I have a SuperB and 4" muffler.
Thread
Thread Starter
Forum
Replies
Last Post
Battering Ram
3rd Gen High Performance and Accessories (5.9L Only)
110
03-25-2004 06:14 PM
BILL DODGE2003
3rd Gen High Performance and Accessories (5.9L Only)
10
03-08-2004 12:59 PM
Original Junior
3rd Gen High Performance and Accessories (5.9L Only)
6
01-15-2004 12:26 AM
Copenhagenjunkie
Performance and Accessories 2nd gen only
2
05-19-2003 08:04 AM