Blacksmokey

Ok I own a 04.5 dodge cummins and the valve cover lettering peeled all off!!! I want a aftermarket valave cover like this red one http://hoeslidiesel.com/store/page12.html BUT FOR A CR!!!
Where can I find these for a CR?

annabelle

Paint your own.

JPR Ram

http://www.genosgarage.com/prodinfo....ABM_*VC0305_RD

You mean like this? They also have blue, black, and polished.

cmnspwr

Get one from Joe Hellmann and have it powdercoated.

essgeetee

$375 for a valve cover, ***?

haloman

Blacksmokey you from around evansville, in? Hoseli Diesel is just right across the river from, their service seems to be good even if thier prices are a little high.

annabelle

http://www.dieselram.com/forum/ubbth...page=2&fpart=1

OldSmokey

I painted mine there are pics in my gallary.

bigredBCS

hellmanns are around 200 powdercoated and they look pretty sweet!

hellmannperformance.com

bdewey

Painted mine with some Krylon Fusion Plasit paint and not a problem yet. Few colors to choose from.

matego

Check out a thread I started a while ago about it. It was titled " valve cover project" and I have had it installed for a while now. I tried to add a link but you can search for it if it doesn't work.

https://www.dieseltruckresource.com/...+cover+project

Diveman

Hey, Matego. I was wondering why you didn't use the breather tube and oil drain tube that go with that valve cover??

matego

The set up that was designed for that valve cover has a crankcase breather that goes into the top of the bell housing. On some heavy duty and industrial ISB's, the engines are kinda in backwards. The gear cover, CP3, air compressor etc. are all in the back, at the firewall. You know what I mean... same but different Everything has been going well with mine, but it does leave a few oil drips in the driveway when it has been run hard.