Use for X2 Control Pod...
#1
Registered User
Thread Starter
Join Date: Jun 2007
Location: NorCal
Posts: 941
Likes: 0
Received 0 Likes
on
0 Posts
Use for X2 Control Pod...
I have left over from my old Quad set-up, the X2 Control Pod. It reads, FP, RP, CT....I am looking to see if there is a way to wire it up as a single FP gauge??? I still have the FP kit and sending unit that worked when I took it out. I am looking to see if I can use this in place of my Di Pricol gauge that has given up the ghost....the CP plugs into the FP kit wiring harness and then has a plug to go into the Commander harness for power....does someone know which wires I would use to power the control pod???? I dont want it for anything else but LP psi....I already have a RP gauge....Anyone?????
Thread
Thread Starter
Forum
Replies
Last Post
Rednecktastic
3rd Gen High Performance and Accessories (5.9L Only)
25
02-24-2009 08:00 PM
BrokeSolid
3rd Gen High Performance and Accessories (5.9L Only)
21
02-03-2009 09:36 AM
Erska
Performance and Accessories 2nd gen only
7
12-11-2008 02:42 PM
bocuso
3rd Gen Engine and Drivetrain -> 2003-2007
27
01-18-2007 12:54 PM