turbo question
06-07-2010, 08:54 AM
#1
Registered User
Thread Starter
Join Date: Jul 2007
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
turbo question
hey guys i found a fairly good deal on a bd super b turbo.This is what the seller told me (it came off of a 3rd gen twin setup but it does not have the elbow pre-molded into the intercooler/discharge side of the charger, so I believe it can be used in a 2nd gen setup).
My question is the turbo is off of an 03 i am wondering if this would work on my 99 2nd gen and if so what i would have to do to make it work any information is greatly appreciated thank you- chris
My question is the turbo is off of an 03 i am wondering if this would work on my 99 2nd gen and if so what i would have to do to make it work any information is greatly appreciated thank you- chris
06-08-2010, 12:28 PM
#3
Registered User
Thread Starter
Join Date: Jul 2007
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
thats what i figured would be one issue not sure of any other would it bolt right up to the manifold.....someone out there has to know something haha
gave bd a ring was on hold for twenty mins had to hang up cause im at work gonna call them when i get out
gave bd a ring was on hold for twenty mins had to hang up cause im at work gonna call them when i get out
Thread
Thread Starter
Forum
Replies
Last Post
j
Performance and Accessories 2nd gen only
5
01-09-2004 08:19 AM
Haulin_in_Dixie
Performance and Accessories 2nd gen only
12
07-21-2003 11:14 AM
redram
Performance and Accessories 2nd gen only
9
12-10-2002 09:54 AM