TST help
#1
Registered User
Thread Starter
Join Date: Apr 2004
Location: Sturgis SD
Posts: 1,609
Likes: 0
Received 0 Likes
on
0 Posts
TST help
Hey guys, can anyone tell me what fues to tap for a tst r49. I checked on there site for the instructions, but my computer wont open them. I left my instructions in my pickup on the other side of the state. Were installing my tst on my brothers pickup to go dyno in about 3 hours. Could anyone help me by checking what fueses to tap into? Thanks a bunch guys Joel.
#4
Registered User
Join Date: Apr 2006
Location: South Indy
Posts: 1,370
Likes: 0
Received 0 Likes
on
0 Posts
I just looked at TST's website and they show two orange wires that are to be connected to two different fuses. My R49 is older, and only has one that I know of. If yours has two orange wires, one wire goes to #36 and the other to #50. It does not say if it matters which orange wire goes to which fuse, so it should not matter. You can always reverse them if something doesn't work correctly.
Here is a photo that may help out
Here is a photo that may help out
#6
Registered User
Join Date: Apr 2006
Location: South Indy
Posts: 1,370
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys, can anyone tell me what fues to tap for a tst r49. I checked on there site for the instructions, but my computer wont open them. I left my instructions in my pickup on the other side of the state. Were installing my tst on my brothers pickup to go dyno in about 3 hours. Could anyone help me by checking what fueses to tap into? Thanks a bunch guys Joel.
#7
Registered User
Thread Starter
Join Date: Apr 2004
Location: Sturgis SD
Posts: 1,609
Likes: 0
Received 0 Likes
on
0 Posts
Its for an 03, thanks for the help guys, I called wap and he checked under the hood for me. Adam thats exactly what wap told me but ive got and r49 so there are two ornge wire. Everything work so hopefully it will dyno something decent. Thanks again for all the help. Ill report back on the numbers. Joel
Trending Topics
#10
Registered User
Join Date: Apr 2006
Location: South Indy
Posts: 1,370
Likes: 0
Received 0 Likes
on
0 Posts
#11
Registered User
Thread Starter
Join Date: Apr 2004
Location: Sturgis SD
Posts: 1,609
Likes: 0
Received 0 Likes
on
0 Posts
RJOS, thanks, we got everything running, but the dyno numbers were not to great. Thanks agin to everyone who offered to help, I love this site!!!!
#13
Banned
Join Date: Dec 2005
Location: Twin Falls, Idaho
Posts: 5,194
Likes: 0
Received 0 Likes
on
0 Posts
#14
Registered User
Join Date: Jan 2006
Location: Indiana
Posts: 3,597
Likes: 0
Received 0 Likes
on
0 Posts
you have to be careful having a walbro pump, theres certain fuse you can and cant tap into. I have talked to them a couple times to dbl check. I would call them also if you havent installed the box yet. dont run the walbro from the fuse box only the tst is what mark told me. I dont see anything running to my fusebox from mine, but as of today I still havent installed it yet.