True 2 1/2 or 3 inch levelin kit??
04-12-2008, 07:46 AM
#1
Registered User
Thread Starter
Join Date: May 2006
Location: Taft, Tennessee
Posts: 379
Likes: 0
Received 0 Likes
on
0 Posts
True 2 1/2 or 3 inch levelin kit??
Who makes a true 2 1/2 or 3 inch levelin kit???
I want one that will bring the front end up enough that a need a 1 or 1 1/2 inch block to sit it level. No I don't want a true lift, done had all that not doin it again.
Also who makes the cheapest control arms?? Thought movin the axle back torwards the bumper will help with rub.
This is what I'm gonna try and do. I'm gonna try and run 16.5X12 wheels with a 4.5 inch backspacin and 33X14.50 super swamper SSRs. I know everyone says nothin smaller than a 17 will fit but I have already saw a truck with 16.5s on there. I'm gonna order one alum. wheel and one steel and see which fits, also I think that the 4.5 backspacin will help since the caliper won't be up in the wheel that much.
I want one that will bring the front end up enough that a need a 1 or 1 1/2 inch block to sit it level. No I don't want a true lift, done had all that not doin it again.
Also who makes the cheapest control arms?? Thought movin the axle back torwards the bumper will help with rub.
This is what I'm gonna try and do. I'm gonna try and run 16.5X12 wheels with a 4.5 inch backspacin and 33X14.50 super swamper SSRs. I know everyone says nothin smaller than a 17 will fit but I have already saw a truck with 16.5s on there. I'm gonna order one alum. wheel and one steel and see which fits, also I think that the 4.5 backspacin will help since the caliper won't be up in the wheel that much.
Thread
Thread Starter
Forum
Replies
Last Post
Silver 002
3rd Gen High Performance and Accessories (5.9L Only)
6
02-17-2008 08:01 PM
cowboy717
Performance and Accessories 2nd gen only
11
12-31-2006 01:38 AM