3rd Gen High Performance and Accessories (5.9L Only) Talk about Dodge/Cummins aftermarket products for third generation trucks here. Can include high-performance mods, or general accessories. THIS IS FOR THE 5.9L ONLY!

Truck wont build boost.

Thread Tools
 
Search this Thread
 
Old 01-18-2008, 12:30 PM
  #76  
Muted one day, Banned the next....... Ah the life of a DTR 1%'er
 
cincydiesel's Avatar
 
Join Date: Jan 2005
Location: Ohio: Home of the disappointing sports teams
Posts: 2,187
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by wardy70
I noticed that also, the truck does not run that bad down low, it is when you get up above 25psi of boost it just wont go. When you haul a big trailer that is where you at a lot. As far as all of this goes the truck will not smoke at all, with the low fueling adj. all the way up it will not smoke.
Let me guess, somedays it smokes just like it should. Five minutes later it wont. I think we have the same truck
Old 01-18-2008, 01:45 PM
  #77  
Registered User
Thread Starter
 
wardy70's Avatar
 
Join Date: Feb 2006
Location: Risingsun Ohio
Posts: 197
Likes: 0
Received 0 Likes on 0 Posts
You got it, but since the problem started no smoke at all.
Old 01-18-2008, 04:53 PM
  #78  
Registered User
Thread Starter
 
wardy70's Avatar
 
Join Date: Feb 2006
Location: Risingsun Ohio
Posts: 197
Likes: 0
Received 0 Likes on 0 Posts
Today could not find a good guage to mount in the cab so I going to order one, unhooked my fass 150 and hooked up my stocker which worked fine when unhooked. Still the same stuff.
Old 01-18-2008, 07:15 PM
  #79  
Muted one day, Banned the next....... Ah the life of a DTR 1%'er
 
cincydiesel's Avatar
 
Join Date: Jan 2005
Location: Ohio: Home of the disappointing sports teams
Posts: 2,187
Likes: 0
Received 0 Likes on 0 Posts
This may sound stupid, however I recently installed a smoke switch. I've noticed that the truck seems to build full boost (36-40psi) more often since I've installed this. I can flip the switch on hit the pedal, flip off the switch and hit the gas again and build full boost. Defently something electranical going on.
Old 01-26-2008, 08:35 PM
  #80  
Registered User
Thread Starter
 
wardy70's Avatar
 
Join Date: Feb 2006
Location: Risingsun Ohio
Posts: 197
Likes: 0
Received 0 Likes on 0 Posts
I drove my truck today with a load for the first time since I have done all this diagnosing to no avail. I noticed when the truck sat for about 10 min. and I started it and ran it the thing would zing right up to 38 psi of boost.
After driving for awhile it would only build 21-24psi I came home and pressure tested the thing again and on the inside of the intercooler was a pinhole on the passenger side tank. Im going to replace and I will let you know what happens. I had already tested once and could not find anything but found it the second time.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rustydeeretech
12 Valve Engine and Drivetrain
7
06-16-2010 09:41 AM
Stroked-Z
12 Valve Engine and Drivetrain
7
10-04-2008 11:28 AM
Racing_Joe66
Performance and Accessories 2nd gen only
6
03-19-2007 06:44 AM
qcstunter
HELP!
8
01-09-2007 04:10 PM
mrwaters
2nd Gen. Dodge Ram - No Drivetrain
4
12-28-2005 10:11 PM



Quick Reply: Truck wont build boost.



All times are GMT -5. The time now is 01:05 PM.