tone ring mod with Edge EZ/Juice stack???
06-27-2006 | 08:49 AM
#1
Thread Starter
Registered User
Joined: Dec 2004
Posts: 572
Likes: 0
From: northern indiana
tone ring mod with Edge EZ/Juice stack???
I have the juice module on my 03 and wasn't happy with low end accelleration so I added a EZ box. Its a lot better now. Just curious if I should/could do the tone ring mod also? Would it advance timing too much along with my boxes?
06-27-2006 | 04:36 PM
#2
Registered User
Joined: Mar 2005
Posts: 51
Likes: 0
From: London, Ky
According to Edge, on a 305/555 engine you should not run an EZ with the Juice. This do to the Juice already steps up the rail pressure.
On the SO's I am not for certain if this is the case for them also.
On the SO's I am not for certain if this is the case for them also.
06-28-2006 | 04:56 AM
#4
Registered User
Joined: Aug 2002
Posts: 8,803
Likes: 0
From: Northern Virginia
I never tried your particular stack but I had to turn my tone ring back to the stock location when I started running a timing box. (Quadzilla and TST) Both gave me terrible timing rattle when cold...
Thread
Thread Starter
Forum
Replies
Last Post
hilclmr2
3rd Gen High Performance and Accessories (5.9L Only)
1
06-11-2007 06:34 PM
txfiremedic
3rd Gen High Performance and Accessories (5.9L Only)
6
01-25-2007 04:30 PM
ataboy9026
3rd Gen High Performance and Accessories (5.9L Only)
2
12-26-2006 08:44 PM
Big Bob
3rd Gen High Performance and Accessories (5.9L Only)
4
11-08-2005 01:41 AM
BossHogg
3rd Gen High Performance and Accessories (5.9L Only)
3
09-14-2005 10:48 AM