onesloryd

The steering makes a difference, a much more positive feel, but you also need to change out your track bar to get the maximum benefit.

LanceK

How much would this complete mod cost?

onesloryd

You will have to contact Don to get a complete price. http://thurenfabrication.com/

You can see a pic. of my truck here http://defianttruckproducts.com/user...hoto%20Gallery scroll down to the bottom.

JbD

Do you have a bigger pic? I'd like to see how the stabilizer is mounted to the tie-rod. Is it clamped on or are there tabs welded on?

onesloryd

They are billet 4130 clamps that I machined up.

BLACK PEARL

Do you have any Pics. of your set up. I have been looking at them but don't know which one to get. I'm a little nervous on the bent one (vs the straight one) which I think we need. I'm worried about the Tie rod up an down movement.

onesloryd

Here is pic. of the clamp and hardware I used.

PWT05Dodge

Don will let you know what you need, though I'm fairly sure 3rd Gen trucks will need the bent arm kit. Give him a call. He is great to talk to, and will let you know everything you need.

JbD

I figured that was the route I was going to go. I'm trying to picture what else you used with the clamp to mount the shock. Has it moved with two bolts versus 4 or 6 like the Kore setup?

onesloryd

I am using two of those clamps per shock mounting plate. Also keep in mind each one of the bolts I used has a clamp load of 7900 lbs. As of now nothing has move.

cquestad

The clamps could be knurled too?